44 Magnum Cowboy

Showing all 4 results


  • .44 Magnum 180 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action– With our 100% hand-loading techniques at “COWBOY CHOICE”- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

    Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Magnum Cowboy Action Hi-Tek Coated Lead 180 grain TCFP rounds feed reliably in Lever Guns as well.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

    Velocity: 510 FPS

    Power Factor: 92

    OAL: 1.590

    Federal Primers!

    Approved for Indoor Ranges!

     

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
    • Greatly minimizes your exposure to lead
    Add to cart

    235 in stock (can be backordered)

  • NEW “WELLS FARGO” Ammo Bags! Includes 250 rounds for your SASS matches and makes a terrific brass bag for spent cartridges and easy access at your cart!

    .44 Magnum 180 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action– With our 100% hand-loading techniques at “COWBOY CHOICE”- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

    Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Magnum Cowboy Action Hi-Tek Coated Lead 180 grain TCFP rounds feed reliably in Lever Guns as well.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

    Velocity: 510 FPS

    Power Factor: 92

    OAL: 1.590

    Federal Primers!

    Approved for Indoor Ranges!

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • Greatly minimizes your exposure to lead
    Add to cart

    43 in stock (can be backordered)

  • .44 Magnum 200 Grain RNFP BLACK Hi-Tek Coated RNFP– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today!

    Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. The 44 Magnum Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
    • Greatly minimizes your exposure to lead

    We put the same care into each round as you would rolling your own!!

    Velocity: 530 FPS

    Approved for Indoor Ranges!

    Elmer Keith, one of the most famous and popular firearms related authors at the time, developed a number of classical heavy handloads for the .44 Special; many are still highly regarded today. He also championed the concept of higher powered big-bore revolvers with Smith & Wesson and Remington Arms, eventually leading to the development of the .357.41, and .44 MagnumsKeith’s suggested designation for the proposed .44 caliber round was the “.44 Special Magnum,” but when Remington Arms developed the cartridge they chose to name it the .44 Remington Magnum. Nonetheless, the new cartridge was developed directly from the .44 Special design by simply lengthening the older case by .125 inch. Remington’s stated rationale for the making of this change was to preclude higher pressured Magnum loads from being chambered in .44 Special revolvers

    Recently the .44 Special has experienced something of a resurgence, as many firearms enthusiasts have realized that the heavily recoiling Magnum round is really “too much pistol” for many applications, and the heavier and more bulky revolvers in which it is chambered are not as convenient to carry. Another key factor fueling the Special’s comeback is its ability to fit in the longer chambers of the aforementioned .44 Magnum revolvers, much like the .38 special fits in the longer chambers of the .357 Magnum. This makes the .44 Special cartridge an attractive alternative for reduced velocity target shooting and  plinking. The recent popularity of Cowboy Action shooting has also helped pique interest in the .44 Special, motivating manufacturers to offer modern and reproduction firearms chambered for this classic cartridge. Check out our 100% hand-loaded Cowboy Action loads in this caliber in our “Cowboy Choice” tab for super mild shooting, accurate loads there as well!

    Velocity: 530 fps

    Meets SASS Power Factor.

    Sized: .430

    Velocity: 530 FPS

    Power Factor: 106

    BHN 12/1

    Add to cart

    659 in stock (can be backordered)

  • NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and makes a terrific brass bag for spent cartridges and easy access at your cart!

    .44 Magnum 200 Grain RNFP BLACK Hi-Tek Coated RNFP– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today!

    Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. The 44 Magnum Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • Greatly minimizes your exposure to lead

    We put the same care into each round as you would rolling your own!!

    Velocity: 530 FPS

    Approved for Indoor Ranges!

    Elmer Keith, one of the most famous and popular firearms related authors at the time, developed a number of classical heavy handloads for the .44 Special; many are still highly regarded today. He also championed the concept of higher powered big-bore revolvers with Smith & Wesson and Remington Arms, eventually leading to the development of the .357.41, and .44 MagnumsKeith’s suggested designation for the proposed .44 caliber round was the “.44 Special Magnum,” but when Remington Arms developed the cartridge they chose to name it the .44 Remington Magnum. Nonetheless, the new cartridge was developed directly from the .44 Special design by simply lengthening the older case by .125 inch. Remington’s stated rationale for the making of this change was to preclude higher pressured Magnum loads from being chambered in .44 Special revolvers

    Recently the .44 Special has experienced something of a resurgence, as many firearms enthusiasts have realized that the heavily recoiling Magnum round is really “too much pistol” for many applications, and the heavier and more bulky revolvers in which it is chambered are not as convenient to carry. Another key factor fueling the Special’s comeback is its ability to fit in the longer chambers of the aforementioned .44 Magnum revolvers, much like the .38 special fits in the longer chambers of the .357 Magnum. This makes the .44 Special cartridge an attractive alternative for reduced velocity target shooting and  plinking. The recent popularity of Cowboy Action shooting has also helped pique interest in the .44 Special, motivating manufacturers to offer modern and reproduction firearms chambered for this classic cartridge. Check out our 100% hand-loaded Cowboy Action loads in this caliber in our “Cowboy Choice” tab for super mild shooting, accurate loads there as well!

    Velocity: 530 fps

    Meets SASS Power Factor.

    Sized: .430

    Velocity: 530 FPS

    Power Factor: 106

    OAL: 1.570

    BHN 12/1

    Add to cart

    32 in stock (can be backordered)


Showing all 4 results

Thank you for viewing the Choice Ammunition Website!Home of Premium, 100% Hand-Loaded Ammunition | Made in Montana, Made with Montana Pride!

In these challenging times in our industry, things change quickly. One day, we are well stocked up on an item, and the next day, we could be out. We are doing everything possible to hand-load our ammunition and get products shipped in a timely manner, but we cannot simply turn machines up like the “factories” do! Yet, we are resourceful in our ways- and usually have ammunition when others do not.

We also strive to provide tremendous customer service. We try to answer all office calls- and actually prefer calls over emails or social media. After your order, our in-stock items typically ship within 24 hours!

From time to time- we do offer industry updates, special promotions, or announcements of new products. If you care to register with us below, we will be sure to include you in these email updates. (We do not share our list with others- or inundate you with emails all the time).

Register to Newsletter

* indicates required


 
 


Thank you for considering Choice Ammunition if you are a new customer- and thank you for another order if you are returning with us again! We truly appreciate all of you, and value each and every order that is made with us.

Jon Wemple
President/CEO

“Jon, Your attitude and true customer care and service is remarkable. Rare in today’s business world. Thank you again for a great experience with your company. Kudos to Marilyn also.”
Sincerely,
Charlie G.

[]