CONTACT US: 406-961-6942
.44 Magnum 180 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action~100% Hand-Loaded!!

.44 Magnum 180 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action~100% Hand-Loaded!!

$42.99

.44 Magnum 180 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action– With our 100% hand-loading techniques at “COWBOY CHOICE”- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Magnum Cowboy Action Hi-Tek Coated Lead 180 grain TCFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

Velocity: 510 FPS

Power Factor: 92

OAL: 1.590

Federal Primers!

Approved for Indoor Ranges!

 

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead
Rounds Per Box: 50

Out of stock

SKU: 180TCFPL44MAG50CCB Categories: ,

Description

.44 Magnum 180 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action– With our 100% hand-loading techniques at “COWBOY CHOICE”- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Magnum Cowboy Action Hi-Tek Coated Lead 180 grain TCFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

Velocity: 510 FPS

Power Factor: 92

OAL: 1.590

Federal Primers!

Approved for Indoor Ranges!

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead

Additional Information

Weight 1.9 lbs
Dimensions 3 × 2.5 × 2 in
Delivery and Returns Content description.

Complete the collection

  • .44 Magnum 200 Grain Hornady XTPElmer Keith, championed the concept of higher powered big-bore revolvers with Smith & Wesson and Remington Arms, eventually leading to the development of the .357, .41, and .44 Magnums. Keith’s suggested designation for the proposed .44 caliber round was the “.44 Special Magnum,” but when Remington Arms developed the cartridge they chose to name it the .44 Remington Magnum. Nonetheless, the new cartridge was developed directly from the .44 Special design by simply lengthening the older case by .125 inch. Remington’s stated rationale for the making of this change was to preclude higher pressured Magnum loads from being chambered in .44 Special revolvers.

    With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! 

    The Bullet-

    Hornady XTP Bullets feature a performance-improved point that has 6 precise folds to divide the bullet into symmetrical sections and initiate controlled expansion at low velocities while not fragmenting at higher velocities. They expand reliably at a wide range of velocities for a deep, terminal penetration with every shot.

    Designed for hunting, self-defense and law enforcement applications, the XTP bullet demonstrates the kind of accuracy that led many competitive shooters to adopt it. Reliable performance makes the XTP the most popular handgun bullet for both target shooters and hunters. But it’s the stopping power of the XTP bullet that has truly built its world-class reputation. From the onset, XTP bullets were specifically designed to expand reliably at a wide range of handgun velocities to deliver deep penetration with every shot.

    • Velocity  1,570 FPS
    • 100% hand loaded with superior quality and performance

    Image result for hornady xtp

    Product Features

    CONTROLLED EXPANSION

    Precise serrations divide the XTP® into symmetrical sections, strategically weakening the jacket and initiating controlled expansion even at low velocities.

    NO EXPOSED LEAD

    The gilding metal jacket protects the nose of the bullet, so the hollow cavity functions properly on impact and ensures proper feeding in semi-automatics.

    SWAGED CORE

    Total uniformity of core density ensures balanced expansion as well as in-flight stability.

    DRAWN GILDING METAL JACKET

    Expansion is controlled by varying jacket thickness down the length of the XTP, providing a definite advantage over plated bullets which have a uniform jacket thickness over the entire bullet.

    These high-performance rounds provide excellent reliability, consistency, accuracy, penetration and stopping power for personal protection.

     

    All brass is carefully selected to ensure it meets our unusually high standards for reliable feeding, corrosion resistance, proper hardness and the ability to withstand maximum chamber pressures.

    Powders in each cartridge are loaded to ensure optimal pressure, velocity and consistency from lot to lot. Each primer is matched to individual loads and specifically selected for their ability to quickly, completely, and reliably ignite the powder charge.

     

    Read more

    Out of stock

Thank you for visiting Choice Ammunition!Home of Premium Ammunition- 100% Hand-Loaded in Western Montana.

As you may know, the ammunition and firearms industry is experiencing unprecedented times beginning with COVID 19 coming from China in early 2020. Some talked of defunding police departments about the same time, even as riots and lawlessness raged on in our cities with unrest. We then saw a very contentious presidential campaign and ultimately- an inauguration of what could be a very unfriendly 2nd Amendment administration controlling both houses of Congress. For these reasons and more, we see demand at all time highs in the industry, in addition to mass shortages of components. I personally do not see things changing any time soon either...

With this, we are doing everything possible to hand-load and get products shipped in a timely manner, but we cannot simply turn machines up like others! Any back-orders on this website that we allow, we feel will ship in a reasonable period of time and we are averaging about 2-3 weeks presently. However, we are reliant on our suppliers to deliver components to us also, and that can unexpectedly be delayed on occasion. When this happens, it is possible to see 30-60 days, and sometimes more- to get ammunition sent out to you. Please know, all backorders will be filled at the price you purchased the ammunition for. If you find something elsewhere- we are happy to cancel any order.

We try to answer all office calls and prefer calls over emails or social media. We ask you to please refrain from calling or changing your order unless it is absolutely necessary- keeping in mind the time-frames I mentioned above. Every call we answer removes the focus on sourcing components and loading/shipping your ammunition!  We promise to get your order out as soon as we possibly can- yet, ask that you please understand this crazy market we are all in- if indeed you are delayed!

We do not believe in price gouging or increasing margins in a market such as this- and we will do everything possible to remain competitive with “factory” ammo, while providing our premium hand-loaded ammunition to the market. It does appear that prices may increase this year however, as there is much volatility in pricing for our brass, bullets, powder and primers.

Thank you for considering Choice Ammunition if you are a new customer- and thank you for another order if you are returning. We truly appreciate all of you and have built our business from going the extra mile with our products and for our customers!

Jon Wemple

President/CEO