CONTACT US: 406-961-6942
.41 Remington Magnum 225 Grain Black Hi-Tek Coated RNFP “Cowboy Choice”~100% Hand-Loaded!!

.41 Remington Magnum 225 Grain Black Hi-Tek Coated RNFP “Cowboy Choice”~100% Hand-Loaded!!

$45.99

.41 Remington Magnum 225 Grain Black Hi-Tek Coated RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .41 Remington Magnum Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .41 Remington Magnum Cowboy Action Hi-Tek Coated Lead 180 grain RNFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
  • Velocity: 510 FPS
  • Federal Primers!

Approved for Indoor Ranges!

 

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead
Rounds Per Box: 50

29 in stock (can be backordered)

SKU: 225RNFPL41MAG50CCB Categories: , ,

Description

.41 Remington Magnum 225 Grain Black Hi-Tek Coated RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .41 Remington Magnum Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .41 Remington Magnum Cowboy Action Hi-Tek Coated Lead 180 grain RNFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
  • Velocity: 510 FPS
  • Federal Primers!

Approved for Indoor Ranges!

 

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead

Additional Information

Weight 2.45 lbs
Dimensions 3 × 2.5 × 2 in
Delivery and Returns Content description.

Complete the collection

  • .41 Remington Magnum 210 Grain Hornady XTP- The .41 Remington Magnum as it is known in unofficial metric designation, is a center fire firearms cartridge primarily developed for use in large-frame revolvers, introduced in 1964 by the Remington Arms Company, intended for hunting and law enforcement purposes.

    In 1963, Elmer Keith and Bill Jordan, with some help from Skeeter Skelton, petitioned Smith & Wesson, Remington, and Norma to produce a pistol and ammunition in .41 caliber which would fall between the extant .357 Magnum and .44 Magnum cartridges in ballistic performance, and at the same time address perceived shortcomings with those loads. While Keith had suggested a softer .41 Special cartridge as early as 1955, this idea was passed over in favor of the Magnum option, and the Special survives only as a custom wildcat cartridge.

     Elmer Keith, Handgun Hunter & Firearm Enthusiast (1899-1984)

    The .357 Magnum suffered from restricted terminal ballistic effectiveness in the early 1960s, as jacketed hollow point bullets were not yet commonly available, and the manufacturer’s standard loadings consisted of simple lead bullets. The powerful .44 Magnum, primarily a heavy hunting round, was considered overkill for police use, generating too much recoil for control under rapid fire. In addition, the revolvers chambered for the .44 were considered too large, bulky, and heavy for police carry.

    Keith’s original vision called for dual power levels in the .41, a heavy magnum load pushing a 210-grain JHP at a muzzle velocity of 1300–1400 feet per second and a milder police loading which was to send a 200-grain semi-wadcutter downrange at around 900 ft/s. The .41 Magnum never enjoyed the popularity and success of either the .357 Magnum or .44 Magnum cartridges, but is still prized by handgun hunters as some feel it generates somewhat lighter recoil and slightly flatter bullet trajectory at long range than the .44. Nevertheless, the .44 Magnum still catalogs a greater variety of heavier bullet weight offerings which are more effective on larger game, and boasts a slight edge in power. Marshall and Sanow called the .41 Magnum “one of our most unappreciated calibers.”

    Choice Ammunition has taken this caliber and once again produced a superior product compared to traditional “factory” rounds available on the market today. Our 100% hand-loading techniques with a proprietary load formula, achieves a muzzle velocity of 1,595 fps in this Defense/Hunting round. The consistencies in powder charge, seating depth and rigorous testing and inspection creates a highly accurate and dependable round of ammunition for when it really counts.

    Designed for hunting, self-defense and law enforcement applications, the XTP bullet demonstrates the kind of accuracy that led many competitive shooters to adopt it. Reliable performance makes the XTP the most popular handgun bullet for both target shooters and hunters. But it’s the stopping power of the XTP bullet that has truly built its world-class reputation. From the onset, XTP bullets were specifically designed to expand reliably at a wide range of handgun velocities to deliver deep penetration with every shot.

    Velocity: 1,585 fps

    100% Hand-Loaded

    Add to cart

    Available on backorder

Thank you for visiting Choice Ammunition!Home of Premium Ammunition- 100% Hand-Loaded in Western Montana.

As you may know, the ammunition and firearms industry is experiencing unprecedented times beginning with COVID 19 coming from China in early 2020. Some talked of defunding police departments about the same time, even as riots and lawlessness raged on in our cities with unrest. We then saw a very contentious presidential campaign and ultimately- an inauguration of what could be a very unfriendly 2nd Amendment administration controlling both houses of Congress. For these reasons and more, we see demand at all time highs in the industry, in addition to mass shortages of components. I personally do not see things changing any time soon either...

With this, we are doing everything possible to hand-load and get products shipped in a timely manner, but we cannot simply turn machines up like others! Any back-orders on this website that we allow, we feel will ship in a reasonable period of time and we are averaging about 2-3 weeks presently. However, we are reliant on our suppliers to deliver components to us also, and that can unexpectedly be delayed on occasion. When this happens, it is possible to see 30-60 days, and sometimes more- to get ammunition sent out to you. Please know, all backorders will be filled at the price you purchased the ammunition for. If you find something elsewhere- we are happy to cancel any order.

We try to answer all office calls and prefer calls over emails or social media. We ask you to please refrain from calling or changing your order unless it is absolutely necessary- keeping in mind the time-frames I mentioned above. Every call we answer removes the focus on sourcing components and loading/shipping your ammunition!  We promise to get your order out as soon as we possibly can- yet, ask that you please understand this crazy market we are all in- if indeed you are delayed!

We do not believe in price gouging or increasing margins in a market such as this- and we will do everything possible to remain competitive with “factory” ammo, while providing our premium hand-loaded ammunition to the market. It does appear that prices may increase this year however, as there is much volatility in pricing for our brass, bullets, powder and primers.

Thank you for considering Choice Ammunition if you are a new customer- and thank you for another order if you are returning. We truly appreciate all of you and have built our business from going the extra mile with our products and for our customers!

Jon Wemple

President/CEO