-
$0.00
- No products in the cart.
38 Special Cowboy
Showing all 8 results
-
38 Special 105 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 105 grain TCFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!Velocity: 650 FPS
OAL: 1.445”
Approved for Indoor Ranges!
100% Hand-Loaded
- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
- Meets SASS Power Factor.
- Sized: .358
- OAL: 1.445”
- Velocity: 650 FPS
- Power Factor: 68
- BHN 12/15
- Federal Primers !!
Add to cart620 in stock (can be backordered)
-
.38 Special 125 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 125 grain TCFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Velocity: 640 FPS
- Power Factor: 80
- OAL: 1.450″
- BHN 12/15
- Approved for Indoor Ranges!
- 100% Hand-Loaded
- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
Add to cart357 in stock (can be backordered)
-
.38 Special Cowboy Action Hi-Tek Coated Lead 125 grain RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Velocity: 690 FPS
- Power Factor: 86
- AOL: 1.350″
- Approved for Indoor Ranges!
- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
Add to cart116 in stock (can be backordered)
-
.38 Special Cowboy Action Hi-Tek Coated Lead 158 grain RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 158 grain RNFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!Velocity: 590 FPS
Power Factor: 93
AOL: 1.420″
Approved for Indoor Ranges!
100% Hand-Loaded !!
- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
Add to cart173 in stock (can be backordered)
-
NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and make a terrific brass bag for spent cartridges and easy access at your cart!
.38 Special 125 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 125 grain TCFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!Velocity: 640 FPS
OAL: 1.450″
Power Factor: 80
Approved for Indoor Ranges!
100% Hand-Loaded
- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
Add to cart71 in stock (can be backordered)
-
NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and makes a terrific brass bag for spent cartridges and easy access at your cart!
.38 Special 105 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 105 grain TCFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!Velocity: 650 FPS
Power Factor: 68
AOL: 1.445″
Approved for Indoor Ranges!
100% Hand-Loaded
- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
- Meets SASS Power Factor.
- Sized: .358
- OAL: 1.445”
- Velocity: 650 FPS
- Power Factor: 68
- BHN 12/15
- Federal Primers !!
Add to cart85 in stock (can be backordered)
-
NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and makes a terrific brass bag for spent cartridges and easy access at your cart!
.38 Special Cowboy Action Hi-Tek Coated Lead 125 grain RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!Velocity: 690 FPS
OAL: 1.350″
BHN 12/15
Federal Primers!
Approved for Indoor Ranges!
100% Hand-Loaded !!
- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
Add to cart118 in stock (can be backordered)
-
NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and makes a terrific brass bag for spent cartridges and easy access at your cart!
.38 Special Cowboy Action Hi-Tek Coated Lead 158 grain RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 158 grain RNFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!Velocity: 590 FPS
Power Factor: 93
AOL: 1.420″
Approved for Indoor Ranges!
100% Hand-Loaded !!
- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
- Greatly minimizes your exposure to lead
Add to cart80 in stock (can be backordered)
Showing all 8 results