.45 Long Colt 200 Grain Hi-Tek Coated RNFP~100% Hand Loaded!!
.357 Magnum 158 Grain RNFP Hi-Tek Coated - 250 Round Box
.45 Long Colt 250 Grain Hi-Tek Coated RNFP~100% Hand Loaded!!
.224 VALKYRIE 55 Grain Barnes TTSX (Lead Free)~100% HAND-LOADED!!
.38 Special 125 Grain Hornady XTP 100% Hand Loaded !!
.45 Auto 230 Grain Hornady XTP 100% Hand Loaded !!
10MM 180 Grain Hornady XTP 100% Hand Loaded!!
6.5 Creedmoor 120 Grain Barnes TTSX (lead free)~100% Hand Loaded !!
.44 Magnum 305 Grain "Choice Bear Defense" WFN w/Gas Check~100% Hand-Loaded!!
6.5 Creedmoor 130 Grain Nosler AccuBond~100% Hand-Loaded!!
.243 Winchester 100 Grain Nosler Partition~100% Hand Loaded !!
6.5 Creedmoor 140 Grain Nosler AccuBond~100% Hand Loaded !!
.223 Remington 55 Grain FMJ~100% Hand-Loaded!!
.300 Weatherby 180 Grain Nosler AccuBond~100% Hand Loaded !!You may be interested in…
-
.44 Magnum 240 Grain Hi-Tek Coated SWC- The .44 Remington Magnum, or simply .44 Magnum (10.9×33mmR), and frequently .44 Mag, is a rimmed, large-bore cartridge originally designed for revolvers. After its introduction, it was quickly adopted for carbines and rifles. Despite the “.44” designation, guns chambered for the .44 Magnum round, and its parent, the .44 Special, use 0.429 in (10.9 mm) diameter bullets.
The .44 Magnum is based on a lengthened .44 Special case, loaded to higher pressures for greater velocity (and thus, energy). The .44 Magnum has since been eclipsed in power by the .454 Casull, and most recently by the .460 S&W Magnum and .500 S&W Magnum, among others; nevertheless, it has remained one of the most popular commercial large-bore magnum cartridges. When loaded to its maximum and with heavy, deeply penetrating bullets, the .44 Magnum cartridge is suitable for short-range hunting of all North American game—though at the cost of heavy recoil and muzzle flash when fired in handguns, less so in carbines and rifles.
Elmer Keith, one of the most famous and popular firearms related authors at the time, developed a number of classical heavy handloads for the .44 Special; many are still highly regarded today. He also championed the concept of higher powered big-bore revolvers with Smith & Wesson and Remington Arms, eventually leading to the development of the .357, .41, and .44 Magnums. Keith’s suggested designation for the proposed .44 caliber round was the “.44 Special Magnum,” but when Remington Arms developed the cartridge they chose to name it the .44 Remington Magnum. Nonetheless, the new cartridge was developed directly from the .44 Special design by simply lengthening the older case by .125 inch.
The Bullet~
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles. Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- Greatly minimizes your exposure to lead
- Velocity: 1,275 fps
- Approved for Indoor Ranges!
Add to cart236 in stock (can be backordered)
