Pistol

Showing 37–48 of 135 results


  • .38 Special 148 Grain Wadcutter~ Unlike a normal bullet that tapers down to a point, a wadcutter has an entirely flat front as wide as the cartridge. In other words, the round is completely cylindrical. Who would want to use such a bullet? Competitive shooters. Normal bullets make holes that can be tough to differentiate when you’re scoring a paper target that’s had a number of shots put through it. Wadcutters were designed to punch distinct circular holes in paper targets, making life a lot easier when determining who won a competitive shooting match.

    • Velocity 890 fps
    • 100% Hand Loaded

    Image result for wadcutter target

    So while we wouldn’t recommend you use wadcutters for self-defense or hunting, their slow velocity is actually very beneficial when training new shooters. Bullets with low velocities have greatly reduced recoil and are really handy when someone is learning the basics of shooting.

  • .38 Special 158 Grain Semi-Wadcutter (SWC)~ A bullet design that used to rule the roost but today is certainly underutilized is the semi wadcutter. The semiwadcutter is something of a middle ground between hard bullets such as full metal jacket and hard-cast rounds and softer and expanding rounds such as soft-cast and hollow point rounds.A Semi-Wadcutter bullet perfect for target shooting and plinking. The nose and sharp should allow the bullet to punch a clean hole through paper targets making scoring simple and precise.

    • Velocity 850 fps
    • 100% Hand Loaded

    Image result for semi wadcutter

    A semi-wadcutter or SWC is a type of all-purpose bullet commonly used in revolvers. The SWC combines features of the wadcutter target bullet and traditional round nosed revolver bullets, and is used in cartridges for hunting, target shooting, and plinking.

  • .38 Special 158 grain Flat Point- These Plated Flat Point Bullets are swaged and plated to final weight and re-struck for accuracy and precision.  This premium, precise plating not only reduces the amount of lead exposure during shooting, it also helps keep your bore much cleaner. The flat point design minimizes expansion and the keeps the bullet traveling straight even through heavy hide and bone. The Flat Point also makes a good choice for target practice, well suited for deep straight line penetration.

    • Velocity 750 FPS
    • 100% Hand Loaded

    With performance similar to our standard ammunition, these rounds are dependable, accurate and affordable enough for practice.

    Image result for range shooting

     

    Question: What is the difference between Plated/Jacketed/Cast bullets?
    • Our bullets begin as a swaged lead core. The plating process works through electrolysis as the lead cores are tumbled in an electrically charged bath containing high-grade copper ingots. The copper clings to the lead and the longer the bullets remain in the bath, the thicker the plating. Our bullets are plated to the correct size and then taken out of the bath.
    • Jacketed bullets start with a copper cup, which is “drawn up” into the form of a jacket. Lead is then swaged into the jacket.
    Question: How thick is the “jacket” on your bullets?
    • Depending upon the caliber, the thickness of the plating on our bullets, ranges from 3.5 up to 8 thousandths of an inch of plating on each side. This is thicker than paper and ensures no lead in your bore. The bullets designed for higher velocities (45-70, 500 S&W etc.) have the thickest plating.
  • .38 Special 158 grain Flat Point- These Plated Flat Point Bullets are swaged and plated to final weight and re-struck for accuracy and precision.  This premium, precise plating not only reduces the amount of lead exposure during shooting, it also helps keep your bore much cleaner. The flat point design minimizes expansion and the keeps the bullet traveling straight even through heavy hide and bone. The Flat Point also makes a good choice for target practice, well suited for deep straight line penetration.

    • Velocity 750 FPS
    • 100% Hand Loaded

    With performance similar to our standard ammunition, these rounds are dependable, accurate and affordable enough for practice.

    Image result for range shooting

     

    Question: What is the difference between Plated/Jacketed/Cast bullets?
    • Our bullets begin as a swaged lead core. The plating process works through electrolysis as the lead cores are tumbled in an electrically charged bath containing high-grade copper ingots. The copper clings to the lead and the longer the bullets remain in the bath, the thicker the plating. Our bullets are plated to the correct size and then taken out of the bath.
    • Jacketed bullets start with a copper cup, which is “drawn up” into the form of a jacket. Lead is then swaged into the jacket.
    Question: How thick is the “jacket” on your bullets?
    • Depending upon the caliber, the thickness of the plating on our bullets, ranges from 3.5 up to 8 thousandths of an inch of plating on each side. This is thicker than paper and ensures no lead in your bore. The bullets designed for higher velocities (45-70, 500 S&W etc.) have the thickest plating.
  • .38 Special 158 grain Flat Point- These Plated Flat Point Bullets are swaged and plated to final weight and re-struck for accuracy and precision.  This premium, precise plating not only reduces the amount of lead exposure during shooting, it also helps keep your bore much cleaner. The flat point design minimizes expansion and the keeps the bullet traveling straight even through heavy hide and bone. The Flat Point also makes a good choice for target practice, well suited for deep straight line penetration.

    • Velocity 750 FPS
    • 100% Hand Loaded

    With performance similar to our standard ammunition, these rounds are dependable, accurate and affordable enough for practice.

    Image result for range shooting

     

    Question: What is the difference between Plated/Jacketed/Cast bullets?
    • Our bullets begin as a swaged lead core. The plating process works through electrolysis as the lead cores are tumbled in an electrically charged bath containing high-grade copper ingots. The copper clings to the lead and the longer the bullets remain in the bath, the thicker the plating. Our bullets are plated to the correct size and then taken out of the bath.
    • Jacketed bullets start with a copper cup, which is “drawn up” into the form of a jacket. Lead is then swaged into the jacket.
    Question: How thick is the “jacket” on your bullets?
    • Depending upon the caliber, the thickness of the plating on our bullets, ranges from 3.5 up to 8 thousandths of an inch of plating on each side. This is thicker than paper and ensures no lead in your bore. The bullets designed for higher velocities (45-70, 500 S&W etc.) have the thickest plating.
  • .38 Special 158 Grain Semi-Wadcutter (SWC)~ A bullet design that used to rule the roost but today is certainly underutilized is the semi wadcutter. The semiwadcutter is something of a middle ground between hard bullets such as full metal jacket and hard-cast rounds and softer and expanding rounds such as soft-cast and hollow point rounds.A Semi-Wadcutter bullet perfect for target shooting and plinking. The nose and sharp should allow the bullet to punch a clean hole through paper targets making scoring simple and precise.

    • Velocity 850 fps
    • 100% Hand Loaded

    Image result for semi wadcutter

    A semi-wadcutter or SWC is a type of all-purpose bullet commonly used in revolvers. The SWC combines features of the wadcutter target bullet and traditional round nosed revolver bullets, and is used in cartridges for hunting, target shooting, and plinking.

  •  

    .38 Special 158 Grain Semi-Wadcutter (SWC)~ A bullet design that used to rule the roost but today is certainly underutilized is the semi wadcutter. The semiwadcutter is something of a middle ground between hard bullets such as full metal jacket and hard-cast rounds and softer and expanding rounds such as soft-cast and hollow point rounds.A Semi-Wadcutter bullet perfect for target shooting and plinking. The nose and sharp should allow the bullet to punch a clean hole through paper targets making scoring simple and precise.

    • Velocity 850 fps
    • 100% Hand Loaded

    Image result for semi wadcutter

    A semi-wadcutter or SWC is a type of all-purpose bullet commonly used in revolvers. The SWC combines features of the wadcutter target bullet and traditional round nosed revolver bullets, and is used in cartridges for hunting, target shooting, and plinking.

     

  • .38 Special Hi-Tek Coated Lead 158 grain RNFP Range Ammo- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today!

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

    Velocity: 1020 FPS

    Approved for Indoor Ranges!

     

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
    • Greatly minimizes your exposure to lead
  • .38 Special Hi-Tek Coated Lead 158 grain RNFP Range Ammo- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today!

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

    Velocity: 1020 FPS

    Approved for Indoor Ranges!

     

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
    • Greatly minimizes your exposure to lead
  • .38 Special Lead cast 105 grain TCFP- REDUCED RECOIL ROUNDS for training and range applications. With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! Our mild shooting REDUCED RECOIL ROUNDS are a pleasure to shoot in repetition with minimal kick back or recoil.

    Low Recoil Ammunition allows shooters the ability to practice comfortably without excessive kick-back. Our 100% hand-loaded ammunition in low recoil will be extremely accurate and dependable, just like all of our ammunition is! We strongly believe in recruiting new shooters, so this is our answer! Kids and those that may not be comfortable with full powered loads can now train and get the feel of their firearm and shooting without developing reluctance from high powered loads. For this reason, we have introduced our full line of REDUCED RECOIL ROUNDS in many calibers. This .38 Special REDUCED RECOIL velocity is 610 fps versus our standard load at 1020 fps
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
  • .38 Special Low Recoil 125 grain TCFP lead cast- Low Recoil Lead cast 125 grain TCFP- REDUCED RECOIL ROUNDS for training and range applications. With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! Our mild shooting REDUCED RECOIL ROUNDS are a pleasure to shoot in repetition with minimal kick back or recoil.

    Low Recoil Ammunition allows shooters the ability to practice comfortably without excessive kick-back. Our 100% hand-loaded ammunition in low recoil will be extremely accurate and dependable, just like all of our ammunition is! We strongly believe in recruiting new shooters, so this is our answer! Kids and those that may not be comfortable with full powered loads can now train and get the feel of their firearm and shooting without developing reluctance from high powered loads. For this reason, we have introduced our full line of REDUCED RECOIL ROUNDS in many calibers. This .38 Special REDUCED RECOIL velocity is 640 fps versus our standard load at 1020 fps
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
  • .38 Special Low Recoil 125 grain TCFP lead cast- Low Recoil Lead cast 125 grain TCFP- REDUCED RECOIL ROUNDS for training and range applications. With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! Our mild shooting REDUCED RECOIL ROUNDS are a pleasure to shoot in repetition with minimal kick back or recoil.

    Low Recoil Ammunition allows shooters the ability to practice comfortably without excessive kick-back. Our 100% hand-loaded ammunition in low recoil will be extremely accurate and dependable, just like all of our ammunition is! We strongly believe in recruiting new shooters, so this is our answer! Kids and those that may not be comfortable with full powered loads can now train and get the feel of their firearm and shooting without developing reluctance from high powered loads. For this reason, we have introduced our full line of REDUCED RECOIL ROUNDS in many calibers. This .38 Special REDUCED RECOIL velocity is 640 fps versus our standard load at 1020 fps
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.

Showing 37–48 of 135 results

Rounds Per Box

Price

Product Categories

Cart

1369 Hwy 93
P.O. Box 212
Victor, MT 59875
United States

e: info@choiceammunition.com
p: 844-446-AMMO

About Choice

Nestled in the scenic Bitterroot Valley of the Big Sky Country in Western Montana, the 6,000 square foot manufacturing and distribution facility of Choice Ammunition produces what could possibly be the most reliable, precision ammunition you can buy. More >>>

NEWSLETTER SIGNUP

Top