CONTACT US: 406-961-6942
.44 Special 200 Grain RNFP BLACK Hi-Tek Coated Lead Cowboy Action~100% Hand Loaded!!

.44 Special 200 Grain RNFP BLACK Hi-Tek Coated Lead Cowboy Action~100% Hand Loaded!!

$46.99

.44 Special 200 Grain RNFP BLACK Hi-Tek Coated Lead Cowboy Action- With our 100% hand-loading techniques of “COWBOY CHOICE” Ammuition- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Special Cowboy Action Hi-Tek Coated Lead 200 grain RNFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

 

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead

We put the same care into each round as you would at your loading bench.

Meets SASS Power Factor. Federal Primers !! Sized: .430 OAL: 1.435”

Velocity: 540 FPS

Power Factor: 108

OAL: 1.445

BHN 12/15

Federal Primers!

Approved for Indoor Ranges!

 

Rounds Per Box: 50

367 in stock (can be backordered)

SKU: 200RNFPL44SP50CCB Categories: ,

Description

 

.44 Special 200 Grain RNFP BLACK Hi-Tek Coated Lead Cowboy Action- With our 100% hand-loading techniques of “COWBOY CHOICE” Ammuition- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Special Cowboy Action Hi-Tek Coated Lead 200 grain RNFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

 

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead

We put the same care into each round as you would at your loading bench.

Meets SASS Power Factor. Federal Primers !! Sized: .430 OAL: 1.435”

Velocity: 540 FPS

Power Factor: 108

OAL: 1.445

BHN 12/15

Federal Primers!

Approved for Indoor Ranges!

 

Additional Information

Weight 2.25 lbs
Dimensions 3 × 2.5 × 2 in
Delivery and Returns Content description.
Thank you for viewing the Choice Ammunition Website!Home of Premium, 100% Hand-Loaded Ammunition | Made in Montana, Made with Montana Pride!

In these challenging times in our industry, things change quickly. One day, we are well stocked up on an item, and the next day, we could be out. We are doing everything possible to hand-load our ammunition and get products shipped in a timely manner, but we cannot simply turn machines up like the “factories” do! Yet, we are resourceful in our ways- and usually have ammunition when others do not.

We also strive to provide tremendous customer service. We try to answer all office calls- and actually prefer calls over emails or social media. After your order, our in-stock items typically ship within 24 hours!

From time to time- we do offer industry updates, special promotions, or announcements of new products. If you care to register with us below, we will be sure to include you in these email updates. (We do not share our list with others- or inundate you with emails all the time).

Register to Newsletter

* indicates required


 
 


Thank you for considering Choice Ammunition if you are a new customer- and thank you for another order if you are returning with us again! We truly appreciate all of you, and value each and every order that is made with us.

Jon Wemple
President/CEO

“Jon, Your attitude and true customer care and service is remarkable. Rare in today’s business world. Thank you again for a great experience with your company. Kudos to Marilyn also.”
Sincerely,
Charlie G.