.38 Short Colt 105 Grain Hi-Tek Coated TCFP~100% Hand-Loaded!!
$36.99
160 in stock
CONTACT US: 406-961-6942
.38 Short Colt 105 Grain Hi-Tek Coated TCFP~100% Hand-Loaded!!

.38 Short Colt 105 Grain Hi-Tek Coated TCFP~100% Hand-Loaded!!

$36.99

.38 Short Colt 105 Grain Black Hi-Tek Coated TCFP- The .38 Short Colt, also known as .38 SC, was a heeled bullet cartridge intended for metallic cartridge conversions of the cap and ball Colt 1851 Navy Revolver from the American Civil War era. Visually, it resembles a .38 S&W but the case dimensions are slightly different. The .38 Short Colt case is the parent to the .38 Long Colt and .38 Special. It is often confused with the .38 S&W.

This cartridge can be safely fired in revolvers chambered for .38 Special or .357 Magnum. Except for case length, the .38 Special is identical to the .38 Short Colt, .38 Long Colt, and .357 Magnum.

With our 100% hand-loading techniques- We place the same care and passion into each and every round produced of this .38 Short Colt, as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! 

The Bullet:

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles. Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!

Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • Greatly minimizes your exposure to lead

Velocity: 768 fps.

Rounds Per Box: 50

160 in stock

SKU: 105TCFPL38SC50B Categories: ,

Description

.38 Short Colt 105 Grain Black Hi-Tek Coated TCFP- The .38 Short Colt, also known as .38 SC, was a heeled bullet cartridge intended for metallic cartridge conversions of the cap and ball Colt 1851 Navy Revolver from the American Civil War era. Visually, it resembles a .38 S&W but the case dimensions are slightly different. The .38 Short Colt case is the parent to the .38 Long Colt and .38 Special. It is often confused with the .38 S&W.

This cartridge can be safely fired in revolvers chambered for .38 Special or .357 Magnum. Except for case length, the .38 Special is identical to the .38 Short Colt, .38 Long Colt, and .357 Magnum.

With our 100% hand-loading techniques- We place the same care and passion into each and every round produced of this .38 Short Colt, as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! 

The Bullet:

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles. Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!

Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • Greatly minimizes your exposure to lead

Velocity: 768 fps.

Additional Information

Weight 1.4 lbs
Dimensions 5.5 × 3 × 2 in
Delivery and Returns Content description.

Complete the collection

  • 38 Special 105 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

    Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 105 grain TCFP rounds feed reliably in Lever Guns as well.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

     

    Velocity: 650 FPS

    OAL: 1.445”

    Approved for Indoor Ranges!

    100% Hand-Loaded

     

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • Greatly minimizes your exposure to lead

     

    • Meets SASS Power Factor.
    • Sized: .358
    • OAL: 1.445”
    • Velocity: 650 FPS
    • Power Factor: 68
    • BHN 12/15
    Sale!
    Add to cart

    717 in stock

  • .357 Magnum 125 Grain Hi-Tek Coated RNFP~ Our coated bullets have become such a hit with our “Cowboy Choice” line, we decided to introduce these tremendously popular bullets into our “Range Choice” lines of ammunition! Our range ammunition is produced with the same loading process as anything we do- 100% Hand-Loaded techniques producing the tightest loading tolerances in the industry, which equates to superior reliability and accuracy!

    Image result for .357 magnum revolver PRACTICE

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely non abrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you (but it’s worth it)!!

    Velocity: 1,250 FPS

    Approved for Indoor Ranges!

     

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • Greatly minimizes your exposure to lead
    Add to cart

    77 in stock

[]