CONTACT US: 406-961-6942
.357 MAGNUM 158 GRAIN RNFP BLACK HI-TEK COATED LEAD “COWBOY CHOICE” AMMUNITION w/CCI PRIMERS~100% HAND-LOADED!!

.357 MAGNUM 158 GRAIN RNFP BLACK HI-TEK COATED LEAD “COWBOY CHOICE” AMMUNITION w/CCI PRIMERS~100% HAND-LOADED!!

$43.99

.357 Magnum Cowboy Action Hi-Tek Coated Lead 158 grain RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

 

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 158 grain RNFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

Approved for Indoor Ranges!

May not feed in lever guns particular to overall length.

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead

Sized: .358

Velocity: FPS 615

Power Factor: 97

OAL: 1.56

Rounds Per Box: 50

Out of stock

SKU: 158RNFPL357MAG50CCB Categories: ,

Description

.357 Magnum Cowboy Action Hi-Tek Coated Lead 158 grain RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

 

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 158 grain RNFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

Approved for Indoor Ranges!

May not feed in lever guns particular to overall length.

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead

Sized: .358

Velocity: FPS 615

Power Factor: 97

OAL: 1.560

Additional Information

Weight 1.5 lbs
Dimensions 5 × 3 × 2 in
Delivery and Returns Content description.

Complete the collection

  • NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and makes a terrific brass bag for spent cartridges and easy access at your cart!

    .357 Magnum Cowboy Action Hi-Tek Coated Lead 158 grain RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .38 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

    Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

     

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 158 grain RNFP rounds feed reliably in Lever Guns as well.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

    Approved for Indoor Ranges!

    May not feed in lever guns particular to overall length.

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • Greatly minimizes your exposure to lead

    Sized: .358

    Velocity: FPS 615

    Power Factor: 97

    OAL: 1.560

    Read more

    Out of stock

Thank you for visiting Choice Ammunition!Home of Premium Ammunition- 100% Hand-Loaded in Western Montana.

As you may know, the ammunition and firearms industry is experiencing unprecedented times beginning with COVID 19 coming from China in early 2020. Some talked of defunding police departments about the same time, even as riots and lawlessness raged on in our cities with unrest. We then saw a very contentious presidential campaign and ultimately- an inauguration of what could be a very unfriendly 2nd Amendment administration controlling both houses of Congress. For these reasons and more, we see demand at all time highs in the industry, in addition to mass shortages of components. I personally do not see things changing any time soon either...

With this, we are doing everything possible to hand-load and get products shipped in a timely manner, but we cannot simply turn machines up like others! Any back-orders on this website that we allow, we feel will ship in a reasonable period of time and we are averaging about 2-3 weeks presently. However, we are reliant on our suppliers to deliver components to us also, and that can unexpectedly be delayed on occasion. When this happens, it is possible to see 30-60 days, and sometimes more- to get ammunition sent out to you. Please know, all backorders will be filled at the price you purchased the ammunition for. If you find something elsewhere- we are happy to cancel any order.

We try to answer all office calls and prefer calls over emails or social media. We ask you to please refrain from calling or changing your order unless it is absolutely necessary- keeping in mind the time-frames I mentioned above. Every call we answer removes the focus on sourcing components and loading/shipping your ammunition!  We promise to get your order out as soon as we possibly can- yet, ask that you please understand this crazy market we are all in- if indeed you are delayed!

We do not believe in price gouging or increasing margins in a market such as this- and we will do everything possible to remain competitive with “factory” ammo, while providing our premium hand-loaded ammunition to the market. It does appear that prices may increase this year however, as there is much volatility in pricing for our brass, bullets, powder and primers.

Thank you for considering Choice Ammunition if you are a new customer- and thank you for another order if you are returning. We truly appreciate all of you and have built our business from going the extra mile with our products and for our customers!

Jon Wemple

President/CEO