.44 Special 180 Grain TCFP Black Hi-Tek Coated Cast~100% Hand-Loaded!!
$41.99
402 in stock
-
+
Add To Cart
CONTACT US: 406-961-6942
Customer Service My Account
Customer Service My Account
â€č Back to previous page
.44 Special 180 Grain TCFP Black Hi-Tek Coated Cast~100% Hand-Loaded!!
Sale!

.44 Special 180 Grain TCFP Black Hi-Tek Coated Cast~100% Hand-Loaded!!

$41.99

.44 Special 180 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Special Cowboy Action Hi-Tek Coated Lead 180 grain TCFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

Velocity: 510 FPS

Approved for Indoor Ranges!

 

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead
Rounds Per Box: 50

402 in stock

Add to wishlist
SKU: 180TCFPL44SP50CCB Category:

Description

.44 Special 180 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Special Cowboy Action Hi-Tek Coated Lead 180 grain TCFP rounds feed reliably in Lever Guns as well.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

Velocity: 510 FPS

Approved for Indoor Ranges!

 

  • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
  • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
  • Our coating gives off no toxins or particulate matter when fired
  • Is 100% non abrasive and contains no PTFE or MOLY
  • They are completely safe to use in Glock’s polygonal rifled barrels
  • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
  • Greatly minimizes your exposure to lead

Additional Information

Weight 1.8 lbs
Dimensions 3 × 2.5 × 2 in
Delivery and Returns Content description.

Complete the collection

  •
    Quick View
    44 Special .44 Special 200 Grain RNFP BLACK HI-TEK COATED LEAD~100% HAND-LOADED!! Rounds Per Box: 200
     $179.99
    Add to wishlist

    NEW BLACK Hi-Tek Coated Bullets !! Almost ZERO Lead Fouling !! Approved for indoor ranges and shoot extremely accurately with our super-tight loading tolerances and techniques. Perfect for target and range shooting.

    .44 Special 200 Grain RNFP BLACK Hi-Tek Coated RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today!

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
    • Greatly minimizes your exposure to lead

    We put the same care into each round as you would at your loading bench.

    Velocity: 860 FPS

     

    Approved for Indoor Ranges!

    Elmer Keith, one of the most famous and popular firearms related authors at the time, developed a number of classical heavy handloads for the .44 Special; many are still highly regarded today. He also championed the concept of higher powered big-bore revolvers with Smith & Wesson and Remington Arms, eventually leading to the development of the .357, .41, and .44 Magnums. Keith’s suggested designation for the proposed .44 caliber round was the “.44 Special Magnum,” but when Remington Arms developed the cartridge they chose to name it the .44 Remington Magnum. Nonetheless, the new cartridge was developed directly from the .44 Special design by simply lengthening the older case by .125 inch. Remington’s stated rationale for the making of this change was to preclude higher pressured Magnum loads from being chambered in .44 Special revolvers

    Recently the .44 Special has experienced something of a resurgence, as many firearms enthusiasts have realized that the heavily recoiling Magnum round is really “too much pistol” for many applications, and the heavier and more bulky revolvers in which it is chambered are not as convenient to carry. Another key factor fueling the Special’s comeback is its ability to fit in the longer chambers of the aforementioned .44 Magnum revolvers, much like the .38 special fits in the longer chambers of the .357 Magnum. This makes the .44 Special cartridge an attractive alternative for reduced velocity target shooting and  plinking. The recent popularity of Cowboy Action shooting has also helped pique interest in the .44 Special, motivating manufacturers to offer modern and reproduction firearms chambered for this classic cartridge. Check out our 100% hand-loaded Cowboy Action loads in this caliber in our “Cowboy Choice” tab for super mild shooting, accurate loads there as well!

    Velocity: 860 fps

    100% Hand-Loaded

    Add to cart

    9 in stock (can be backordered)

Related products

  •
    Quick View
    44 Special Cowboy .44 Special 200 Grain RNFP BLACK Hi-Tek Coated Lead Cowboy Action~100% Hand Loaded!! Rounds Per Box: 50
     $41.99
    Add to wishlist

    .44 Special 200 Grain RNFP BLACK Hi-Tek Coated Lead Cowboy Action- With our 100% hand-loading techniques of “COWBOY CHOICE” Ammuition- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

    Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Special Cowboy Action Hi-Tek Coated Lead 200 grain RNFP rounds feed reliably in Lever Guns as well.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

     

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
    • Greatly minimizes your exposure to lead

    We put the same care into each round as you would at your loading bench.

    Meets SASS Power Factor. Federal Primers !! Sized: .430 OAL: 1.435”

    Velocity: 540 FPS

    Power Factor: 108

    OAL: 1.445

    BHN 12/15

    Approved for Indoor Ranges!

    Sale!
    Add to cart

    645 in stock

  •
    Quick View
    44 Special Cowboy .44 Special 180 Grain “WELLS FARGO BAG” Ammo! TCFP BLACK Hi-Tek Coated Lead Cowboy Action~100% Hand-Loaded!! Rounds Per Box: 250
     $189.99
    Add to wishlist

    NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and makes a terrific brass bag for spent cartridges and easy access at your cart!

    .44 Special 180 Grain TCFP BLACK Hi-Tek Coated Lead Cowboy Action– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

    Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Special Cowboy Action Hi-Tek Coated Lead 180 grain TCFP rounds feed reliably in Lever Guns as well.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

    Velocity: 510 FPS

    Power Factor: 92

    OAL: 1.470

    Approved for Indoor Ranges!

     

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • Greatly minimizes your exposure to lead
    Sale!
    Add to cart

    56 in stock

  •
    Quick View
    44 Special Cowboy .44 Special 200 Grain “WELLS FARGO BAG” Ammo! RNFP BLACK Hi-Tek Coated Lead Cowboy Action~100% Hand Loaded!! Rounds Per Box: 250
     $189.99
    Add to wishlist

    NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and makes a terrific brass bag for spent cartridges and easy access at your cart!

    .44 Special 200 Grain RNFP BLACK Hi-Tek Coated Lead Cowboy Action- With our 100% hand-loading techniques of “COWBOY CHOICE” Ammuition- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .44 Special Cowboy Action line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters. Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.

    Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .44 Special Cowboy Action Hi-Tek Coated Lead 200 grain RNFP rounds feed reliably in Lever Guns as well.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

     

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • Greatly minimizes your exposure to lead

    We put the same care into each round as you would at your loading bench.

    Meets SASS Power Factor. Federal Primers !! Sized: .430 OAL: 1.435”

    Velocity: 540 FPS

    Power Factor: 108

    OAL: 1.445

    BHN 12/15

    Federal Primers!

    Approved for Indoor Ranges!

    Sale!
    Add to cart

    36 in stock

[]