.38 Special 148 Grain Hi-Tek Coated Wadcutter 100% Hand-Loaded!!
$36.99
0 in stock
CONTACT US: 406-961-6942
.38 Special 148 Grain Hi-Tek Coated Wadcutter 100% Hand-Loaded!!

.38 Special 148 Grain Hi-Tek Coated Wadcutter 100% Hand-Loaded!!

$36.99

.38 Special 148 grain Hi-Tek Coated Wadcutter- Target shooters, here is a great round for you! Unlike a normal bullet that tapers down to a point, a wadcutter has an entirely flat front as wide as the cartridge. In other words, the round is completely cylindrical. Who will use such a bullet? Competitive shooters. Normal bullets make holes that can be tough to differentiate when you score a paper target that has a number of shots put through it. Wadcutters were designed to punch distinct circular holes in paper targets, making life a lot easier when determining who wins a competitive shooting match.

With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! 

The .38 Special was designed in 1898 to be a higher velocity round, with better penetration properties than the .38 Long Colt that was in Government Service in the Philippines during the Spanish–American War. The .38 Long Colt revolver round wouldn’t penetrate the insurgent Philippine Morro warrior shields, and the Government contracted the new revolver round to Smith & Wesson.

Except for case length, the .38 Special is identical to the .38 Short Colt, .38 Long Colt, and .357 Magnum. This allows the .38 Special round to be safely fired in revolvers chambered for the .357 Magnum, and the .38 Long Colt in revolvers chambered for .38 Special, increasing the versatility of this cartridge.

   

Velocity: 800 fps

100% Hand-Loaded

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.

Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!

Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
Rounds Per Box: 50

Available on backorder

SKU: 148WCL38SP50B Categories: ,

Description

.38 Special 148 grain Hi-Tek Coated Wadcutter- Target shooters, here is a great round for you! Unlike a normal bullet that tapers down to a point, a wadcutter has an entirely flat front as wide as the cartridge. In other words, the round is completely cylindrical. Who will use such a bullet? Competitive shooters. Normal bullets make holes that can be tough to differentiate when you score a paper target that has a number of shots put through it. Wadcutters were designed to punch distinct circular holes in paper targets, making life a lot easier when determining who wins a competitive shooting match.

With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! 

The .38 Special was designed in 1898 to be a higher velocity round, with better penetration properties than the .38 Long Colt that was in Government Service in the Philippines during the Spanish–American War. The .38 Long Colt revolver round wouldn’t penetrate the insurgent Philippine Morro warrior shields, and the Government contracted the new revolver round to Smith & Wesson.

Except for case length, the .38 Special is identical to the .38 Short Colt, .38 Long Colt, and .357 Magnum. This allows the .38 Special round to be safely fired in revolvers chambered for the .357 Magnum, and the .38 Long Colt in revolvers chambered for .38 Special, increasing the versatility of this cartridge.

   

Velocity: 800 fps

100% Hand-Loaded

We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.
Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.

Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!

Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

Additional Information

Weight 1.7 lbs
Dimensions 5 × 3 × 2 in
Delivery and Returns Content description.

Complete the collection

  • 38 Special 148 grain Hi-Tek Coated Wadcutter- Target shooters, here is a great round for you! Unlike a normal bullet that tapers down to a point, a wadcutter has an entirely flat front as wide as the cartridge. In other words, the round is completely cylindrical. Who would want to use such a bullet? Competitive shooters. Normal bullets make holes that can be tough to differentiate when you’re scoring a paper target that’s had a number of shots put through it. Wadcutters were designed to punch distinct circular holes in paper targets, making life a lot easier when determining who won a competitive shooting match.

    With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! 

    The .38 Special was designed in 1898 to be a higher velocity round, with better penetration properties than the .38 Long Colt that was in Government Service in the Philippines during the Spanish–American War. The .38 Long Colt revolver round wouldn’t penetrate the insurgent Philippine Morro warrior shields, and the Government contracted the new revolver round to Smith & Wesson.

    Except for case length, the .38 Special is identical to the .38 Short Colt, .38 Long Colt, and .357 Magnum. This allows the .38 Special round to be safely fired in revolvers chambered for the .357 Magnum, and the .38 Long Colt in revolvers chambered for .38 Special, increasing the versatility of this cartridge.

       

    Velocity: 800 fps

    100% Hand-Loaded

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .38 Special Cowboy Action Hi-Tek Coated Lead 105 grain TCFP rounds feed reliably in Lever Guns as well.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.

    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!

    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
    Add to cart

    14 in stock (can be backordered)

  • .38 Special Hi-Tek Coated Lead 125 grain RNFP Range Ammo- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today!

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!

    Velocity: 1,020 FPS

    Approved for Indoor Ranges!

     

    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
    • Greatly minimizes your exposure to lead
    Add to cart

    68 in stock

[]