.280 Ackley Improved 168 Grain BERGER VLD-HUNTING~100% HAND-LOADED!!
$96.99
20 in stock
CONTACT US: 406-961-6942
.280 Ackley Improved 168 Grain BERGER VLD-HUNTING~100% HAND-LOADED!!

.280 Ackley Improved 168 Grain BERGER VLD-HUNTING~100% HAND-LOADED!!

$96.99

.280 Ackley Improved 168 Grain Berger VLD-H– The primary difference between the standard .280 Rem. and the .280 Ackley Improved is the steeper 40 degree, which lengthens the case body and allows for about 5 percent more powder capacity. When P.O. Ackley gave the .280 Remington a steep 40-degree shoulder and straightened out most of the cartridge case’s body taper, he likely knew he was on to something special. However, it’s doubtful he anticipated that more than a half-century later, his .280 Ackley Improved cartridge would blossom into a favorite of savvy open-country hunters across the West.

Decades ahead of his time in cartridge design, Ackley became a household name for his work, at least among cartridge enthusiasts. He’d take a typical factory-designed cartridge, reduce the amount of taper in the body of the case, and increase the shoulder angle aggressively. These modifications resulted in added capacity, which increased velocity, and less case stretch, which resulted in longer case life. The .280 AI’s additional case capacity does good things, but it doesn’t change laws of physics. With equal barrel lengths, the Ackley Improved version gets you about 100 additional fps of velocity with a 140-grain bullet and a 24-inch barrel.

Choice Ammunition, and our 100% Hand-Loading techniques- produce a round of ammunition for the .280 Ackley Improved that is demanded in big game hunting. Accuracy, consistency and dependability are crucial at that final moments of your hunt. Choice Ammunition takes this responsibility seriously by meticulously weighing each powder charge with our proprietary formulas and temperature insensitive powders, seating the bullet at the exact length for optimal performance and test firing each and every lot of ammunition at an average of 500% over industry average. We have no high speed production machines- only passionate and dedicated load technicians pulling each and every handle, producing one round of ammunition at a time. 

The Bullet-

The Berger VLD design incorporates a sharp nose that allows the bullet to penetrate 2″ to 3″ before it starts to expand. After the initial expansion, the bullet will shed between 40% and 85% of its weight as shrapnel into the surrounding tissue (internal organs). The combination between the shrapnel and the hydrostatic shock produces a massive wound cavity within the vital area that will be 13″ – 15″ long. This massive wound cavity results in the animal dropping fast since most go into shock after such a tremendous blow. Those animals that don’t go down immediately will soon succumb to blood pressure loss and/or organ failure producing a quick ethical kill.

  • 100% Hand-Loaded
  • Velocity 2,972 fps
  • G-1 BC 0.618
Rounds Per Box: 20

20 in stock

SKU: 168VLDH280AI20 Categories: ,

Description

.280 Ackley Improved 168 Grain Berger VLD-H– The primary difference between the standard .280 Rem. and the .280 Ackley Improved is the steeper 40 degree, which lengthens the case body and allows for about 5 percent more powder capacity. When P.O. Ackley gave the .280 Remington a steep 40-degree shoulder and straightened out most of the cartridge case’s body taper, he likely knew he was on to something special. However, it’s doubtful he anticipated that more than a half-century later, his .280 Ackley Improved cartridge would blossom into a favorite of savvy open-country hunters across the West.

Decades ahead of his time in cartridge design, Ackley became a household name for his work, at least among cartridge enthusiasts. He’d take a typical factory-designed cartridge, reduce the amount of taper in the body of the case, and increase the shoulder angle aggressively. These modifications resulted in added capacity, which increased velocity, and less case stretch, which resulted in longer case life. The .280 AI’s additional case capacity does good things, but it doesn’t change laws of physics. With equal barrel lengths, the Ackley Improved version gets you about 100 additional fps of velocity with a 140-grain bullet and a 24-inch barrel.

Choice Ammunition, and our 100% Hand-Loading techniques- produce a round of ammunition for the .280 Ackley Improved that is demanded in big game hunting. Accuracy, consistency and dependability are crucial at that final moments of your hunt. Choice Ammunition takes this responsibility seriously by meticulously weighing each powder charge with our proprietary formulas and temperature insensitive powders, seating the bullet at the exact length for optimal performance and test firing each and every lot of ammunition at an average of 500% over industry average. We have no high speed production machines- only passionate and dedicated load technicians pulling each and every handle, producing one round of ammunition at a time. 

The Bullet-

150SCIR280AI20

The Berger VLD design incorporates a sharp nose that allows the bullet to penetrate 2″ to 3″ before it starts to expand. After the initial expansion, the bullet will shed between 40% and 85% of its weight as shrapnel into the surrounding tissue (internal organs). The combination between the shrapnel and the hydrostatic shock produces a massive wound cavity within the vital area that will be 13″ – 15″ long. This massive wound cavity results in the animal dropping fast since most go into shock after such a tremendous blow. Those animals that don’t go down immediately will soon succumb to blood pressure loss and/or organ failure producing a quick ethical kill.

  • 100% Hand-Loaded
  • Velocity 2,972 fps

Additional Information

Weight 1.4 lbs
Dimensions 6 × 3.5 × 1.5 in
Delivery and Returns Content description.

Complete the collection

  • .280 Ackley Improved 162 Grain Hornady ELD-X– The primary difference between the standard .280 Rem. and the .280 Ackley Improved is the steeper 40 degree, which lengthens the case body and allows for about 5 percent more powder capacity. When P.O. Ackley gave the .280 Remington a steep 40-degree shoulder and straightened out most of the cartridge case’s body taper, he likely knew he was on to something special. However, it’s doubtful he anticipated that more than a half-century later, his .280 Ackley Improved cartridge would blossom into a favorite of savvy open-country hunters across the West.

    Decades ahead of his time in cartridge design, Ackley became a household name for his work, at least among cartridge enthusiasts. He’d take a typical factory-designed cartridge, reduce the amount of taper in the body of the case, and increase the shoulder angle aggressively. These modifications resulted in added capacity, which increased velocity, and less case stretch, which resulted in longer case life. The .280 AI’s additional case capacity does good things, but it doesn’t change laws of physics. With equal barrel lengths, the Ackley Improved version gets you about 100 additional fps of velocity with a 140-grain bullet and a 24-inch barrel.

    Choice Ammunition, and our 100% Hand-Loading techniques- produce a round of ammunition for the .280 Ackley Improved that is demanded in big game hunting. Accuracy, consistency and dependability are crucial at that final moments of your hunt. Choice Ammunition takes this responsibility seriously by meticulously weighing each powder charge with our proprietary formulas and temperature insensitive powders, seating the bullet at the exact length for optimal performance and test firing each and every lot of ammunition at an average of 500% over industry average. We have no high speed production machines- only passionate and dedicated load technicians pulling each and every handle, producing one round of ammunition at a time. 

    The Bullet-

    Image result for eld-x bullets

    The Heat Shield tip of the Hornady ELD-X bullet defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. With high velocity, 0-400 yard impact, the bullet continually expands throughout its penetration path. The thick shank of the jacket and high Interlock ring keep the core and jacket together providing 50-60% weight retention. Upon low velocity, 400+ yard impacts, the Heat Shield tip drives backward into the bullet to initiate expansion. Exhibiting conventional expansion with a large mushroom and 85-90% retained weight the bullet provides deep penetration and large wound cavities.

    • Velocity 2,945 fps
    • 100% Hand Loaded
    • G-1 BC 0.63
    Add to cart

    17 in stock

  • .280 Ackley Improved 160 Grain Nosler AccuBond– The primary difference between the standard .280 Rem. and the .280 Ackley Improved is the steeper 40 degree, which lengthens the case body and allows for about 5 percent more powder capacity. When P.O. Ackley gave the .280 Remington a steep 40-degree shoulder and straightened out most of the cartridge case’s body taper, he likely knew he was on to something special. However, it’s doubtful he anticipated that more than a half-century later, his .280 Ackley Improved cartridge would blossom into a favorite of savvy open-country hunters across the West.

    Decades ahead of his time in cartridge design, Ackley became a household name for his work, at least among cartridge enthusiasts. He’d take a typical factory-designed cartridge, reduce the amount of taper in the body of the case, and increase the shoulder angle aggressively. These modifications resulted in added capacity, which increased velocity, and less case stretch, which resulted in longer case life. The .280 AI’s additional case capacity does good things, but it doesn’t change laws of physics. With equal barrel lengths, the Ackley Improved version gets you about 100 additional fps of velocity with a 140-grain bullet and a 24-inch barrel.

    Choice Ammunition, and our 100% Hand-Loading techniques- produce a round of ammunition for the .280 Ackley Improved that is demanded in big game hunting. Accuracy, consistency and dependability are crucial at that final moments of your hunt. Choice Ammunition takes this responsibility seriously by meticulously weighing each powder charge with our proprietary formulas and temperature insensitive powders, seating the bullet at the exact length for optimal performance and test firing each and every lot of ammunition at an average of 500% over industry average. We have no high speed production machines- only passionate and dedicated load technicians pulling each and every handle, producing one round of ammunition at a time. 

    The Bullet

    Through an exclusive bonding process that eliminates voids in the bullet core, AccuBond couples Nosler’s proven copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep and retains its weight, without causing extensive barrel fouling. The unique white polymer tip resists deforming and initiates expansion on impact. Nosler’s Solid Base at the rear of the bullet acts as a platform for large diameter mushrooms.

    • Velocity 2,942 fps
    • 100% Hand Loaded
    • G-1 BC 0.531
    Add to cart

    53 in stock (can be backordered)

  • 280 Ackley Improved 150 Grain Swift Scirocco– The primary difference between the standard .280 Rem. and the .280 Ackley Improved is the steeper 40 degree, which lengthens the case body and allows for about 5 percent more powder capacity. When P.O. Ackley gave the .280 Remington a steep 40-degree shoulder and straightened out most of the cartridge case’s body taper, he likely knew he was on to something special. However, it’s doubtful he anticipated that more than a half-century later, his .280 Ackley Improved cartridge would blossom into a favorite of savvy open-country hunters across the West.

    Decades ahead of his time in cartridge design, Ackley became a household name for his work, at least among cartridge enthusiasts. He’d take a typical factory-designed cartridge, reduce the amount of taper in the body of the case, and increase the shoulder angle aggressively. These modifications resulted in added capacity, which increased velocity, and less case stretch, which resulted in longer case life. The .280 AI’s additional case capacity does good things, but it doesn’t change laws of physics. With equal barrel lengths, the Ackley Improved version gets you about 100 additional fps of velocity with a 140-grain bullet and a 24-inch barrel.

    Choice Ammunition, and our 100% Hand-Loading techniques- produce a round of ammunition for the .280 Ackley Improved that is demanded in big game hunting. Accuracy, consistency and dependability are crucial at that final moments of your hunt. Choice Ammunition takes this responsibility seriously by meticulously weighing each powder charge with our proprietary formulas and temperature insensitive powders, seating the bullet at the exact length for optimal performance and test firing each and every lot of ammunition at an average of 500% over industry average. We have no high speed production machines- only passionate and dedicated load technicians pulling each and every handle, producing one round of ammunition at a time. 

    he Bullet:

    The Swift Scirocco bonded is the perfect bullet design for today’s fast, flat-shooting long range cartridges. Its secant ogive, 15 degree boat tail base and polymer tip create a sleek, aerodynamic profile that helps maintain down-range velocities and flat trajectories. The extra heavy tapering jacket wall with an internally bonded lead core provides structural integrity, reliable expansion and penetration with over 70% weight retention.

    • Velocity 3,050 fps
    • 100% Hand Loaded
    • G-1 BC 0.515
  • .280 Ackley Improved 145 Grain Barnes Long Range LRX (Lead Free)– The primary difference between the standard .280 Rem. and the .280 Ackley Improved is the steeper 40 degree, which lengthens the case body and allows for about 5 percent more powder capacity. When P.O. Ackley gave the .280 Remington a steep 40-degree shoulder and straightened out most of the cartridge case’s body taper, he likely knew he was on to something special. However, it’s doubtful he anticipated that more than a half-century later, his .280 Ackley Improved cartridge would blossom into a favorite of savvy open-country hunters across the West.

    Decades ahead of his time in cartridge design, Ackley became a household name for his work, at least among cartridge enthusiasts. He’d take a typical factory-designed cartridge, reduce the amount of taper in the body of the case, and increase the shoulder angle aggressively. These modifications resulted in added capacity, which increased velocity, and less case stretch, which resulted in longer case life. The .280 AI’s additional case capacity does good things, but it doesn’t change laws of physics. With equal barrel lengths, the Ackley Improved version gets you about 100 additional fps of velocity with a 140-grain bullet and a 24-inch barrel.

    Choice Ammunition, and our 100% Hand-Loading techniques- produce a round of ammunition for the .280 Ackley Improved that is demanded in big game hunting. Accuracy, consistency and dependability are crucial at that final moments of your hunt. Choice Ammunition takes this responsibility seriously by meticulously weighing each powder charge with our proprietary formulas and temperature insensitive powders, seating the bullet at the exact length for optimal performance and test firing each and every lot of ammunition at an average of 500% over industry average. We have no high speed production machines- only passionate and dedicated load technicians pulling each and every handle, producing one round of ammunition at a time. 

    The Bullet- 

    The Long-Range X Bullet (LRX) line is designed after the best-selling Tipped Triple-Shock X Bullet, the LRX bullet design increases Ballistic Coefficient values by increasing ogive and boat tail lengths to improve the bullets’ long-range ballistic performance. For the hunter who is confident in long-range hunting, the LRX will fill the niche of this new hunting craze. LRX bullets will continue to be manufactured with the proven 100-percent copper, lead-free bodies. The bullet’s polymer tip initiates expansion, causing the nose cavity to open instantly on contact doubling the bullet’s original diameter while creating four cutting petals that wreak extensive internal damage. Exceptional performance means clean, quick kill.

    • Velocity 3,083 fps
    • 100% Hand-Loaded
    • G-1 BC 0.486
    Add to cart

    61 in stock (can be backordered)

[]