Reloading

Showing 49–60 of 65 results


  • Nosler introduces its own line of custom brass in the form of premium cases bearing the Nosler headstamp. Nosler Custom brass is prepped and weight-sorted for maximum accuracy and consistency potential. Nosler Brass is sized, trimmed to length, case mouth is deburred and chamfered, flash hole deburred, weight sorted, sized, polished and finally inspected and packaged … meaning all the prep work has been done before you open the box. All it needs is a primer, powder….ready to load!

  • Hornady Brass is manufactured to extremely tight tolerances to ensure this critical element is as consistent as possible. Brass is the foundation of an accurate cartridge, not a commodity, Hornady takes greater care in its creation. Every single Hornady case, regardless of the lot in which it was produced, is virtually identical to other Hornady cases in the same caliber. For you, this means consistent concentricity, pressures, velocity and accuracy — every time. Benchrest shooters have long known that uniform case wall thickness is vital to accuracy.  With Hornady, you’ll get more reloads from your brass.

    Tighter Wall Concentricity

    Uniform Case Wall Thickness

    Consistent Weight and Capacity

    More Reloads per Case

  • Choice Ammunition is Proud to offer Norma Unprimed Brass Cartridge Cases.

    For more than a century, hunters pushing past the ordinary have relied on Norma Ammunition.

    It has taken the biggest animals far, far away. The most accomplished sportsmen all over the world have tested Norma cartridges on the range and in grueling conditions afield.

    No matter where you hunt, there´s a Norma cartridge for your rifle and the game at hand. Norma´s got your back with over a hundred years of dedication, commitment and Quality. Norma Brass ~ No Boundaries.

  • We use a unique heat-set “HI-TEK Coating” manufactured in Australia where it has been used for more than 20 years. The Hi-Tek Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.
     
    Our bullets are “Hard-Cast” and  use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets. Our bullet alloy is purchased directly from a local foundry that has the knowledge, equipment and experience to manufacture bullet alloy to exacting specifications.
     
    Hi-Tek bullets are safe to shoot indoors and your dies will remain clean during the reloading process. Coated bullets produce higher velocities. The coating gives off no toxic out gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube to gum up your loading dies and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner reloading equipment and cleaner guns.
    Sized: 358
    BHN: 12/15
     
  • Starline is a family owned business and prides itself on producing the highest quality brass case available. With a production process focused on quality not quantity, Starline makes the finest brass and has for more than 40 years.

    Starline’s 45-70 brass has been tested at elevated pressures suitable for Magnum Heavy Hunting Loads in adequate gun systems. When loading with black powder, annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads. The Starline case is produced very strong to withstand high pressure loads associated with smokeless hunting loads.Customers may anneal for specific application.

  • Founded in 2011, Kinetic Industries is a brass casing manufacturer located in Eden Prairie, Minnesota, offering an ample line of high quality, private label, match grade brass at very competitive prices—and it’s all Made in the USA. Currently, Kinetic Industries offers brass casings in 6.5 Creedmoor, .308 Win., or .338 Lapua

  • Founded in 2011, Kinetic Industries is a brass casing manufacturer located in Eden Prairie, Minnesota, offering an ample line of high quality, private label, match grade brass at very competitive prices—and it’s all Made in the USA. Currently, Kinetic Industries offers brass casings in 6.5 Creedmoor, .308 Win., or .338 Lapua

  • Founded in 2011, Kinetic Industries is a brass casing manufacturer located in Eden Prairie, Minnesota, offering an ample line of high quality, private label, match grade brass at very competitive prices—and it’s all Made in the USA. Currently, Kinetic Industries offers brass casings in 6.5 Creedmoor, .308 Win., or .338 Lapua

  • Nosler introduces its own line of custom brass in the form of premium cases bearing the Nosler headstamp. Nosler Custom brass is prepped and weight-sorted for maximum accuracy and consistency potential. Nosler Brass is sized, trimmed to length, case mouth is deburred and chamfered, flash hole deburred, weight sorted, sized, polished and finally inspected and packaged … meaning all the prep work has been done before you open the box. All it needs is a primer, powder….ready to load!

  • Hornady Brass is manufactured to extremely tight tolerances to ensure this critical element is as consistent as possible. Brass is the foundation of an accurate cartridge, not a commodity, Hornady takes greater care in its creation. Every single Hornady case, regardless of the lot in which it was produced, is virtually identical to other Hornady cases in the same caliber. For you, this means consistent concentricity, pressures, velocity and accuracy — every time. Benchrest shooters have long known that uniform case wall thickness is vital to accuracy.  With Hornady, you’ll get more reloads from your brass.

    Tighter Wall Concentricity

    Uniform Case Wall Thickness

    Consistent Weight and Capacity

    More Reloads per Case

  • Nosler introduces its own line of custom brass in the form of premium cases bearing the Nosler headstamp. Nosler Custom brass is prepped and weight-sorted for maximum accuracy and consistency potential. Nosler Brass is sized, trimmed to length, case mouth is deburred and chamfered, flash hole deburred, weight sorted, sized, polished and finally inspected and packaged … meaning all the prep work has been done before you open the box. All it needs is a primer, powder….ready to load!

  • Nosler introduces its own line of custom brass in the form of premium cases bearing the Nosler headstamp. Nosler Custom brass is prepped and weight-sorted for maximum accuracy and consistency potential. Nosler Brass is sized, trimmed to length, case mouth is deburred and chamfered, flash hole deburred, weight sorted, sized, polished and finally inspected and packaged … meaning all the prep work has been done before you open the box. All it needs is a primer, powder….ready to load!


Showing 49–60 of 65 results

Rounds Per Box

Price

Product Categories

Cart

1369 Hwy 93,
P.O. Box 212,
Victor, MT, 59875,
United States.

e: info@choiceammunition.com
p: 844-446-AMMO

About Choice

Nestled in the scenic Bitterroot Valley of the Big Sky Country in Western Montana, the 6,000 square foot manufacturing and distribution facility of Choice Ammunition produces what could possibly be the most reliable, precision ammunition you can buy. More >>>

NEWSLETTER SIGNUP

Top