Pistol

Showing 73–84 of 119 results


  • 44 Magnum 240 Grain Semi-Wadcutter(SWC)– Grain Semi-Wadcutter (SWC)~ A bullet design that used to rule the roost but today is certainly underutilized is the semi wadcutter. The semiwadcutter is something of a middle ground between hard bullets such as full metal jacket and hard-cast rounds and softer and expanding rounds such as soft-cast and hollow point rounds.A Semi-Wadcutter bullet perfect for target shooting and plinking. The nose and sharp should allow the bullet to punch a clean hole through paper targets making scoring simple and precise.

    Image result for 44 magnum 240 semi wadcutter

    • Velocity 1,150 fps
    • 100% Hand Loaded

    A semi-wadcutter or SWC is a type of all-purpose bullet commonly used in revolvers. The SWC combines features of the wadcutter target bullet and traditional round nosed revolver bullets, and is used in cartridges for hunting, target shooting, and plinking.

  • .44 Magnum Low Recoil 200 grain RNFP Lead~ REDUCED RECOIL ROUNDS for training and range applications. With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! Our mild shooting REDUCED RECOIL ROUNDS are a pleasure to shoot in repetition with minimal kick back or recoil.

    Low Recoil Ammunition allows shooters the ability to practice comfortably without excessive kick-back. Our 100% hand-loaded ammunition in low recoil will be extremely accurate and dependable, just like all of our ammunition is! We strongly believe in recruiting new shooters, so this is our answer! Kids and those that may not be comfortable with full powered loads can now train and get the feel of their firearm and shooting without developing reluctance from high powered loads. For this reason, we have introduced our full line of REDUCED RECOIL ROUNDS in many calibers. This .44 Magnum Low Recoil 200 grain RNFP Lead velocity is 530 fps versus our standard load at 1000 fps
     Federal Primers!

    Velocity: 530 fps

  • .44 Magnum Low Recoil 200 grain RNFP Lead~ REDUCED RECOIL ROUNDS for training and range applications. With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! Our mild shooting REDUCED RECOIL ROUNDS are a pleasure to shoot in repetition with minimal kick back or recoil.

    Low Recoil Ammunition allows shooters the ability to practice comfortably without excessive kick-back. Our 100% hand-loaded ammunition in low recoil will be extremely accurate and dependable, just like all of our ammunition is! We strongly believe in recruiting new shooters, so this is our answer! Kids and those that may not be comfortable with full powered loads can now train and get the feel of their firearm and shooting without developing reluctance from high powered loads. For this reason, we have introduced our full line of REDUCED RECOIL ROUNDS in many calibers. This .44 Magnum Low Recoil 200 grain RNFP Lead velocity is 530 fps versus our standard load at 1000 fps
     Federal Primers!

    Velocity: 530 fps

  •  .44 Special 200 grain lead RNFP REDUCED RECOIL!

    REDUCED RECOIL ROUNDS for training and range applications. With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! Our mild shooting REDUCED RECOIL ROUNDS are a pleasure to shoot in repetition with minimal kick back or recoil.

    Low Recoil Ammunition allows shooters the ability to practice comfortably without excessive kick-back. Our 100% hand-loaded ammunition in low recoil will be extremely accurate and dependable, just like all of our ammunition is! We strongly believe in recruiting new shooters, so this is our answer! Kids and those that may not be comfortable with full powered loads can now train and get the feel of their firearm and shooting without developing reluctance from high powered loads. For this reason, we have introduced our full line of REDUCED RECOIL ROUNDS in many calibers. This .44 Special REDUCED RECOIL velocity is 540 fps versus our standard load at 860 fps

    Velocity: 540 fps

    Elmer Keith, one of the most famous and popular firearms related authors at the time, developed a number of classical heavy handloads for the .44 Special; many are still highly regarded today. He also championed the concept of higher powered big-bore revolvers with Smith & Wesson and Remington Arms, eventually leading to the development of the .357.41, and .44 MagnumsKeith’s suggested designation for the proposed .44 caliber round was the “.44 Special Magnum,” but when Remington Arms developed the cartridge they chose to name it the .44 Remington Magnum. Nonetheless, the new cartridge was developed directly from the .44 Special design by simply lengthening the older case by .125 inch. Remington’s stated rationale for the making of this change was to preclude higher pressured Magnum loads from being chambered in .44 Special revolvers

    Recently the .44 Special has experienced something of a resurgence, as many firearms enthusiasts have realized that the heavily recoiling Magnum round is really “too much pistol” for many applications, and the heavier and more bulky revolvers in which it is chambered are not as convenient to carry. Another key factor fueling the Special’s comeback is its ability to fit in the longer chambers of the aforementioned .44 Magnum revolvers, much like the .38 special fits in the longer chambers of the .357 Magnum. This makes the .44 Special cartridge an attractive alternative for reduced velocity target shooting and  plinking. The recent popularity of Cowboy Action shooting has also helped pique interest in the .44 Special, motivating manufacturers to offer modern and reproduction firearms chambered for this classic cartridge. Check out our 100% hand-loaded Cowboy Action loads in this caliber in our “Cowboy Choice” tab for super mild shooting, accurate loads there as well!

     

  •  .44 Special 200 grain lead RNFP REDUCED RECOIL!

    REDUCED RECOIL ROUNDS for training and range applications. With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! Our mild shooting REDUCED RECOIL ROUNDS are a pleasure to shoot in repetition with minimal kick back or recoil.

    Low Recoil Ammunition allows shooters the ability to practice comfortably without excessive kick-back. Our 100% hand-loaded ammunition in low recoil will be extremely accurate and dependable, just like all of our ammunition is! We strongly believe in recruiting new shooters, so this is our answer! Kids and those that may not be comfortable with full powered loads can now train and get the feel of their firearm and shooting without developing reluctance from high powered loads. For this reason, we have introduced our full line of REDUCED RECOIL ROUNDS in many calibers. This .44 Special REDUCED RECOIL velocity is 540 fps versus our standard load at 860 fps

    Velocity: 540 fps

    Elmer Keith, one of the most famous and popular firearms related authors at the time, developed a number of classical heavy handloads for the .44 Special; many are still highly regarded today. He also championed the concept of higher powered big-bore revolvers with Smith & Wesson and Remington Arms, eventually leading to the development of the .357.41, and .44 MagnumsKeith’s suggested designation for the proposed .44 caliber round was the “.44 Special Magnum,” but when Remington Arms developed the cartridge they chose to name it the .44 Remington Magnum. Nonetheless, the new cartridge was developed directly from the .44 Special design by simply lengthening the older case by .125 inch. Remington’s stated rationale for the making of this change was to preclude higher pressured Magnum loads from being chambered in .44 Special revolvers

    Recently the .44 Special has experienced something of a resurgence, as many firearms enthusiasts have realized that the heavily recoiling Magnum round is really “too much pistol” for many applications, and the heavier and more bulky revolvers in which it is chambered are not as convenient to carry. Another key factor fueling the Special’s comeback is its ability to fit in the longer chambers of the aforementioned .44 Magnum revolvers, much like the .38 special fits in the longer chambers of the .357 Magnum. This makes the .44 Special cartridge an attractive alternative for reduced velocity target shooting and  plinking. The recent popularity of Cowboy Action shooting has also helped pique interest in the .44 Special, motivating manufacturers to offer modern and reproduction firearms chambered for this classic cartridge. Check out our 100% hand-loaded Cowboy Action loads in this caliber in our “Cowboy Choice” tab for super mild shooting, accurate loads there as well!

     

  •  .44 Special 200 grain lead RNFP REDUCED RECOIL!

    REDUCED RECOIL ROUNDS for training and range applications. With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! Our mild shooting REDUCED RECOIL ROUNDS are a pleasure to shoot in repetition with minimal kick back or recoil.

    Low Recoil Ammunition allows shooters the ability to practice comfortably without excessive kick-back. Our 100% hand-loaded ammunition in low recoil will be extremely accurate and dependable, just like all of our ammunition is! We strongly believe in recruiting new shooters, so this is our answer! Kids and those that may not be comfortable with full powered loads can now train and get the feel of their firearm and shooting without developing reluctance from high powered loads. For this reason, we have introduced our full line of REDUCED RECOIL ROUNDS in many calibers. This .44 Special REDUCED RECOIL velocity is 540 fps versus our standard load at 860 fps

    Velocity: 540 fps

    Elmer Keith, one of the most famous and popular firearms related authors at the time, developed a number of classical heavy handloads for the .44 Special; many are still highly regarded today. He also championed the concept of higher powered big-bore revolvers with Smith & Wesson and Remington Arms, eventually leading to the development of the .357.41, and .44 MagnumsKeith’s suggested designation for the proposed .44 caliber round was the “.44 Special Magnum,” but when Remington Arms developed the cartridge they chose to name it the .44 Remington Magnum. Nonetheless, the new cartridge was developed directly from the .44 Special design by simply lengthening the older case by .125 inch. Remington’s stated rationale for the making of this change was to preclude higher pressured Magnum loads from being chambered in .44 Special revolvers

    Recently the .44 Special has experienced something of a resurgence, as many firearms enthusiasts have realized that the heavily recoiling Magnum round is really “too much pistol” for many applications, and the heavier and more bulky revolvers in which it is chambered are not as convenient to carry. Another key factor fueling the Special’s comeback is its ability to fit in the longer chambers of the aforementioned .44 Magnum revolvers, much like the .38 special fits in the longer chambers of the .357 Magnum. This makes the .44 Special cartridge an attractive alternative for reduced velocity target shooting and  plinking. The recent popularity of Cowboy Action shooting has also helped pique interest in the .44 Special, motivating manufacturers to offer modern and reproduction firearms chambered for this classic cartridge. Check out our 100% hand-loaded Cowboy Action loads in this caliber in our “Cowboy Choice” tab for super mild shooting, accurate loads there as well!

     

  • NEW BLACK Hi-Tek Coated Bullets !! Almost ZERO Lead Fouling !! Approved for indoor ranges and shoot extremely accurately with our super-tight loading tolerances and techniques. Perfect for target and range shooting.

    .44 Special 200 Grain RNFP BLACK Hi-Tek Coated RNFP- With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today!

    We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube.
    Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.
    Hi-Tek Supercoat bullets are safe to shoot indoors.  The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!
    Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!
    • Our bullets greatly reduce the amount of smoke normally associated with cast bullets
    • Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
    • Our coating gives off no toxins or particulate matter when fired
    • Is 100% non abrasive and contains no PTFE or MOLY
    • They are completely safe to use in Glock’s polygonal rifled barrels
    • There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
    • Greatly minimizes your exposure to lead

    We put the same care into each round as you would at your loading bench.

    Velocity: 860 FPS

     

    Approved for Indoor Ranges!

    Elmer Keith, one of the most famous and popular firearms related authors at the time, developed a number of classical heavy handloads for the .44 Special; many are still highly regarded today. He also championed the concept of higher powered big-bore revolvers with Smith & Wesson and Remington Arms, eventually leading to the development of the .357.41, and .44 MagnumsKeith’s suggested designation for the proposed .44 caliber round was the “.44 Special Magnum,” but when Remington Arms developed the cartridge they chose to name it the .44 Remington Magnum. Nonetheless, the new cartridge was developed directly from the .44 Special design by simply lengthening the older case by .125 inch. Remington’s stated rationale for the making of this change was to preclude higher pressured Magnum loads from being chambered in .44 Special revolvers

    Recently the .44 Special has experienced something of a resurgence, as many firearms enthusiasts have realized that the heavily recoiling Magnum round is really “too much pistol” for many applications, and the heavier and more bulky revolvers in which it is chambered are not as convenient to carry. Another key factor fueling the Special’s comeback is its ability to fit in the longer chambers of the aforementioned .44 Magnum revolvers, much like the .38 special fits in the longer chambers of the .357 Magnum. This makes the .44 Special cartridge an attractive alternative for reduced velocity target shooting and  plinking. The recent popularity of Cowboy Action shooting has also helped pique interest in the .44 Special, motivating manufacturers to offer modern and reproduction firearms chambered for this classic cartridge. Check out our 100% hand-loaded Cowboy Action loads in this caliber in our “Cowboy Choice” tab for super mild shooting, accurate loads there as well!

    Velocity: 860 fps

    100% Hand-Loaded

  •  

    .45 Auto 185 Grain Hornady XTP- Hornady XTP Bullets feature a performance-improved point that has 6 precise folds to divide the bullet into symmetrical sections and initiate controlled expansion at low velocities while not fragmenting at higher velocities. They expand reliably at a wide range of velocities for a deep, terminal penetration with every shot.

    Designed for hunting, self-defense and law enforcement applications, the XTP bullet demonstrates the kind of accuracy that led many competitive shooters to adopt it. Reliable performance makes the XTP the most popular handgun bullet for both target shooters and hunters. But it’s the stopping power of the XTP bullet that has truly built its world-class reputation. From the onset, XTP bullets were specifically designed to expand reliably at a wide range of handgun velocities to deliver deep penetration with every shot.

    The .45 ACP (Automatic Colt Pistol), or .45 Auto is a handgun cartridge designed by John Browning in 1905, for use in his prototype Colt semi-automatic pistol. After successful military trials, it was adopted as the standard chambering for Colt’s M1911 pistol, being named .45 ACP. It came to life as a result of unsatisfactory performance of the .38-caliber handgun our Armed Forces were using during the Philippine-American War at the end of the 19th century. Soldiers had noted that the .38 handguns were definitely less effective than the .45 caliber Colt Single Action Army. The Army Ordinance Department agreed, and development of a new sidearm began. Germany’s DWM, and the American firms of Savage and Colt (the Browning design) submitted new designs, with the Colt pistol and cartridge coming out on top. This iconic combination was officially adopted as the M1911, firing “Cal. 45 Automatic Pistol Ball Cartridge, Model of 1911.” The original load centered around a 200-grain bullet at 900 fps, but was revised to the formula we all know, driving a 230-grain round nosed bullet at a muzzle velocity of 850 fps. The .45 ACP was an immediate success, and continues to be so to this day.

    • Velocity  1,000 FPS
    • 100% hand loaded with superior quality and performance
    • Trust your most important shots with Hand-Loaded Ammunition

    Image result for hornady xtp

    Product Features

    CONTROLLED EXPANSION

    Precise serrations divide the XTP into symmetrical sections, strategically weakening the jacket and initiating controlled expansion even at low velocities.

    NO EXPOSED LEAD

    The gilding metal jacket protects the nose of the bullet, so the hollow cavity functions properly on impact and ensures proper feeding in semi-automatics.

    SWAGED CORE

    Total uniformity of core density ensures balanced expansion as well as in-flight stability.

    DRAWN GILDING METAL JACKET

    Expansion is controlled by varying jacket thickness down the length of the XTP, providing a definite advantage over plated bullets which have a uniform jacket thickness over the entire bullet.

    These high-performance rounds provide excellent reliability, consistency, accuracy, penetration and stopping power for personal protection.

    All brass is carefully selected to ensure it meets our unusually high standards for reliable feeding, corrosion resistance, proper hardness and the ability to withstand maximum chamber pressures.

    Powders in each cartridge are loaded to ensure optimal pressure, velocity and consistency from lot to lot. Each primer is matched to individual loads and specifically selected for their ability to quickly, completely, and reliably ignite the powder charge.

    — Velocity 1,000 FPS
    — 100% Hand Loaded with superior quality & performance

  • .45 Auto 185 Grain Hornady XTP- Hornady XTP Bullets feature a performance-improved point that has 6 precise folds to divide the bullet into symmetrical sections and initiate controlled expansion at low velocities while not fragmenting at higher velocities. They expand reliably at a wide range of velocities for a deep, terminal penetration with every shot.

    Designed for hunting, self-defense and law enforcement applications, the XTP bullet demonstrates the kind of accuracy that led many competitive shooters to adopt it. Reliable performance makes the XTP the most popular handgun bullet for both target shooters and hunters. But it’s the stopping power of the XTP bullet that has truly built its world-class reputation. From the onset, XTP bullets were specifically designed to expand reliably at a wide range of handgun velocities to deliver deep penetration with every shot.

    The .45 ACP (Automatic Colt Pistol), or .45 Auto is a handgun cartridge designed by John Browning in 1905, for use in his prototype Colt semi-automatic pistol. After successful military trials, it was adopted as the standard chambering for Colt’s M1911 pistol, being named .45 ACP. It came to life as a result of unsatisfactory performance of the .38-caliber handgun our Armed Forces were using during the Philippine-American War at the end of the 19th century. Soldiers had noted that the .38 handguns were definitely less effective than the .45 caliber Colt Single Action Army. The Army Ordinance Department agreed, and development of a new sidearm began. Germany’s DWM, and the American firms of Savage and Colt (the Browning design) submitted new designs, with the Colt pistol and cartridge coming out on top. This iconic combination was officially adopted as the M1911, firing “Cal. 45 Automatic Pistol Ball Cartridge, Model of 1911.” The original load centered around a 200-grain bullet at 900 fps, but was revised to the formula we all know, driving a 230-grain round nosed bullet at a muzzle velocity of 850 fps. The .45 ACP was an immediate success, and continues to be so to this day.

    • Velocity  1,000 FPS
    • 100% hand loaded with superior quality and performance
    • Trust your most important shots with Hand-Loaded Ammunition

    Image result for hornady xtp

    Product Features

    CONTROLLED EXPANSION

    Precise serrations divide the XTP into symmetrical sections, strategically weakening the jacket and initiating controlled expansion even at low velocities.

    NO EXPOSED LEAD

    The gilding metal jacket protects the nose of the bullet, so the hollow cavity functions properly on impact and ensures proper feeding in semi-automatics.

    SWAGED CORE

    Total uniformity of core density ensures balanced expansion as well as in-flight stability.

    DRAWN GILDING METAL JACKET

    Expansion is controlled by varying jacket thickness down the length of the XTP, providing a definite advantage over plated bullets which have a uniform jacket thickness over the entire bullet.

    These high-performance rounds provide excellent reliability, consistency, accuracy, penetration and stopping power for personal protection.

    All brass is carefully selected to ensure it meets our unusually high standards for reliable feeding, corrosion resistance, proper hardness and the ability to withstand maximum chamber pressures.

    Powders in each cartridge are loaded to ensure optimal pressure, velocity and consistency from lot to lot. Each primer is matched to individual loads and specifically selected for their ability to quickly, completely, and reliably ignite the powder charge.

    — Velocity 1,000 FPS
    — 100% Hand Loaded with superior quality & performance

  • .45 ACP 200 Grain Plated RNFP- These Plated Flat Point Bullets are swaged and plated to final weight and re-struck for accuracy and precision.  This premium, precise plating not only reduces the amount of lead exposure during shooting, it also helps keep your bore much cleaner. The flat point design minimizes expansion and the keeps the bullet traveling straight even through heavy hide and bone. The Flat Point also makes a good choice for target practice, well suited for deep straight line penetration.

    • Velocity 975 FPS
    • 100% Hand Loaded

    With performance similar to our standard ammunition, these rounds are dependable, accurate and affordable enough for practice.

    Image result for range shooting

     

    Question: What is the difference between Plated/Jacketed/Cast bullets?
    • Our bullets begin as a swaged lead core. The plating process works through electrolysis as the lead cores are tumbled in an electrically charged bath containing high-grade copper ingots. The copper clings to the lead and the longer the bullets remain in the bath, the thicker the plating. Our bullets are plated to the correct size and then taken out of the bath.
    • Jacketed bullets start with a copper cup, which is “drawn up” into the form of a jacket. Lead is then swaged into the jacket.
    Question: How thick is the “jacket” on your bullets?
    • Depending upon the caliber, the thickness of the plating on our bullets, ranges from 3.5 up to 8 thousandths of an inch of plating on each side. This is thicker than paper and ensures no lead in your bore. The bullets designed for higher velocities (45-70, 500 S&W etc.) have the thickest plating.
    • Velocity 975 fps
    • 100% Hand Loaded
  • .45 ACP 200 Grain Plated RNFP- These Plated Flat Point Bullets are swaged and plated to final weight and re-struck for accuracy and precision.  This premium, precise plating not only reduces the amount of lead exposure during shooting, it also helps keep your bore much cleaner. The flat point design minimizes expansion and the keeps the bullet traveling straight even through heavy hide and bone. The Flat Point also makes a good choice for target practice, well suited for deep straight line penetration.

    • Velocity 975 FPS
    • 100% Hand Loaded

    With performance similar to our standard ammunition, these rounds are dependable, accurate and affordable enough for practice.

    Image result for range shooting

     

    Question: What is the difference between Plated/Jacketed/Cast bullets?
    • Our bullets begin as a swaged lead core. The plating process works through electrolysis as the lead cores are tumbled in an electrically charged bath containing high-grade copper ingots. The copper clings to the lead and the longer the bullets remain in the bath, the thicker the plating. Our bullets are plated to the correct size and then taken out of the bath.
    • Jacketed bullets start with a copper cup, which is “drawn up” into the form of a jacket. Lead is then swaged into the jacket.
    Question: How thick is the “jacket” on your bullets?
    • Depending upon the caliber, the thickness of the plating on our bullets, ranges from 3.5 up to 8 thousandths of an inch of plating on each side. This is thicker than paper and ensures no lead in your bore. The bullets designed for higher velocities (45-70, 500 S&W etc.) have the thickest plating.
    • Velocity 975 fps
    • 100% Hand Loaded
  • .45 ACP 200 Grain Plated RNFP- These Plated Flat Point Bullets are swaged and plated to final weight and re-struck for accuracy and precision.  This premium, precise plating not only reduces the amount of lead exposure during shooting, it also helps keep your bore much cleaner. The flat point design minimizes expansion and the keeps the bullet traveling straight even through heavy hide and bone. The Flat Point also makes a good choice for target practice, well suited for deep straight line penetration.

    • Velocity 975 FPS
    • 100% Hand Loaded

    With performance similar to our standard ammunition, these rounds are dependable, accurate and affordable enough for practice.

    Image result for range shooting

     

    Question: What is the difference between Plated/Jacketed/Cast bullets?
    • Our bullets begin as a swaged lead core. The plating process works through electrolysis as the lead cores are tumbled in an electrically charged bath containing high-grade copper ingots. The copper clings to the lead and the longer the bullets remain in the bath, the thicker the plating. Our bullets are plated to the correct size and then taken out of the bath.
    • Jacketed bullets start with a copper cup, which is “drawn up” into the form of a jacket. Lead is then swaged into the jacket.
    Question: How thick is the “jacket” on your bullets?
    • Depending upon the caliber, the thickness of the plating on our bullets, ranges from 3.5 up to 8 thousandths of an inch of plating on each side. This is thicker than paper and ensures no lead in your bore. The bullets designed for higher velocities (45-70, 500 S&W etc.) have the thickest plating.
    • Velocity 975 fps
    • 100% Hand Loaded

Showing 73–84 of 119 results

Rounds Per Box

Price

Product Categories

Cart

1369 Hwy 93
P.O. Box 212
Victor, MT 59875
United States

e: info@choiceammunition.com
p: 844-446-AMMO

About Choice

Nestled in the scenic Bitterroot Valley of the Big Sky Country in Western Montana, the 6,000 square foot manufacturing and distribution facility of Choice Ammunition produces what could possibly be the most reliable, precision ammunition you can buy. More >>>

NEWSLETTER SIGNUP

Top