-
$0.00
- No products in the cart.
Cowboy Action 45
Cowboy Action 45
Showing 1–12 of 17 results
-
NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and makes a terrific brass bag for spent cartridges and easy access at your cart!
.45 ACP 230 Grain Round Nose Hi-Tek Coated Lead– 100% Hand-Loaded for those that don’t “Roll their Own” in the WILD BUNCH Crowd!!!
Welcome to the “Hottest Game” around, SASS Wild Bunch Action Shooting. Undeniably, Wild Bunch Action Shooting shares similarities to SASS Cowboy Action Shooting. However, there are some notable differences. The sport uses 1911 Pistols in .45 acp, Lever Action Rifles chambered for pistol caliber of .40 and above, and model 1897 12ga. Pump Shotguns. Sanctioned matches are designed specifically to provide stage scenarios which incorporate down range as well as lateral movement, more pistol and shotgun rounds fired per stage and a variety of reactive targets such as plate racks, dueling trees, moving targets and rifle/pistol knockdown targets as well.
WBAS is a dynamic, fun, fast paced action shooting sport designed for the shooter. We will wager that once you shoot your first Wild Bunch stage, you will be just as enthusiastic about participating in this new sport as we are!
SASS Wild Bunch Action Shooting is now sanctioning matches around the country!
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
Sized: .452
OAL: 1.270
Velocity: 675 fps
Power Factor: 155
BHN 12-15
Approved for use in Indoor Ranges !!
-
.45 Long Colt 180 Grain Hi-Tek Coated Black RNFP Lead Cowboy Action- Developed by Real Cowboy Action Shooters! “COWBOY CHOICE” makes a true CAS competition load! Low recoil, super accurate. 100% Hand Loaded! We put the same care into each round as you would at your loading bench.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
Meets SASS Power Factor.
Velocity: 460 FPS
Federal Primers!
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These .357 Magnum Cowboy Action Hi-Tek Coated Lead 125 grain TCFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
- Greatly minimizes your exposure to lead
The .45 Long Colt gun cartridge dates to 1872 and started out as a round designed for the Colt Single Action Army revolver. In fact, many .45 Long Colt guns today are replicas of the Colt Single Action Army revolver. Often marketed as a magnum-handgun hunting round, one of the most common uses of .45 Long Colt ammo today is in Cowboy Action Shooting. Hunters sometimes also use .45 Long Colt revolvers and some derringers (generally for collections or self-defense) that are chambered for the .45 Long Colt cartridge as well. Companies such as Winchester, Rossi, Uberti, and the Henry Repeating Arms company also produce lever-action .45 Long Colt rifles. Hunters and shooters will enjoy the vintage feel of the .45 Long Colt rifle, with its long history of use in the Army and was used for hunting or self-defense in the Old West. With their rich history, .45 Long Colt guns offer both modern functionality and fun for collectors, Cowboy Action shooters, and reenactors.
This .45-caliber has long been considered “the gun that won the West.” Noted for its power and reliability, it was the most popular full sized revolver of the late 1800s. Turned out by the Colt Fire Arms Manufacturing Company of Hartford, Connecticut, it sold for $17 by mail order. A classic single action revolver, it remains in production today.
The model 1873 revolver, commonly known as the Colt Single Action, Peacemaker, or Frontier, was actually developed in 1872, based on the patents granted to Charles B. Richards and W. Mason. In 1873, the US Army adopted this revolver along with its black powder centerfire cartridge of .45 caliber, and issued it to troops in 2 models.
-
.45 Long Colt Cowboy Action Hi-Tek Coated Lead 200 Grain RNFP– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .45 Long Colt “Cowboy Choice” line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters! Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These 45 Long Colt “Cowboy Choice” Hi-Tek Coated Lead 125 grain TCFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
- Greatly minimizes your exposure to lead
Meets SASS Power Factor.
Federal Primers !!
Sized: .452
OAL: 1.570”
Velocity: 440
FPS Power Factor: 88
BHN 12/15
Approved for use in Indoor Ranges !!
-
.45 Long Colt Cowboy Action Hi-Tek Coated Lead 200 Grain RNFP– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .45 Long Colt “Cowboy Choice” line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters! Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These 45 Long Colt “Cowboy Choice” Hi-Tek Coated Lead 125 grain TCFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
- Greatly minimizes your exposure to lead
Meets SASS Power Factor.
Federal Primers !!
Sized: .452
OAL: 1.570”
Velocity: 440
FPS Power Factor: 88
BHN 12/15
Approved for use in Indoor Ranges !!
-
.45 Long Colt Cowboy Action Hi-Tek Coated Lead 200 Grain RNFP– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .45 Long Colt “Cowboy Choice” line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters! Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These 45 Long Colt “Cowboy Choice” Hi-Tek Coated Lead 125 grain TCFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
- Greatly minimizes your exposure to lead
Meets SASS Power Factor.
Federal Primers !!
Sized: .452
OAL: 1.570”
Velocity: 440
FPS Power Factor: 88
BHN 12/15
Approved for use in Indoor Ranges !!
-
NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and make a terrific brass bag for spent cartridges and easy access at your cart!
.45 Long Colt Cowboy Action Hi-Tek Coated Lead 180 Grain RNFP– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .45 Long Colt “Cowboy Choice” line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters! Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These 45 Long Colt “Cowboy Choice”Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
Meets SASS Power Factor.
Federal Primers !!
Sized: .452
OAL: 1.570”
Velocity: 440
FPS Power Factor: 88
BHN 12/15
Approved for use in Indoor Ranges !!
-
NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and make a terrific brass bag for spent cartridges and easy access at your cart!
.45 Long Colt Cowboy Action Hi-Tek Coated Lead 200 Grain RNFP– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .45 Long Colt “Cowboy Choice” line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters! Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These 45 Long Colt “Cowboy Choice”Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
Meets SASS Power Factor.
Federal Primers !!
Sized: .452
OAL: 1.570”
Velocity: 440
FPS Power Factor: 88
BHN 12/15
Approved for use in Indoor Ranges !!
-
NEW “WELLS FARGO” Ammo Bags!! Includes 250 rounds for your SASS matches and make a terrific brass bag for spent cartridges and easy access at your cart!
.45 Long Colt Cowboy Action Hi-Tek Coated Lead 250 Grain RNFP– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .45 Long Colt “Cowboy Choice” line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters! Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These 45 Long Colt “Cowboy Choice”Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- Greatly minimizes your exposure to lead
Meets SASS Power Factor.
Federal Primers !!
Sized: .452
OAL: 1.570”
Velocity: 440
FPS Power Factor: 88
BHN 12/15
Approved for use in Indoor Ranges !!
-
.45 Long Colt Cowboy Action Hi-Tek Coated Lead 250 Grain RNFP– With our 100% hand-loading techniques- We place the same care and passion into each and every round produced as those do in their own private loading rooms. These techniques produce the most reliable, accurate round of ammunition available on the market today! The .45 Long Colt “Cowboy Choice” line is developed for Cowboy Action Shooters by Cowboy Action (SASS) Shooters! Our mild shooting Cowboy Action line meets SASS Power Factors, yet are a pleasure to shoot in repetition with minimal kick back or recoil.
Cowboy Choice Ammunition is an affiliated SASS Merchant, recognized as a leader in true Cowboy Action Ammunition. Visit the Single Action Shooting Society website at: http://www.sassnet.com/
We use a unique heat-set “HI-TEK Supercoat” manufactured in Australia, where it has been used for more than 20 years. The Hi-Tek Supercoat Bullet Coating totally encapsulates the lead projectiles and replaces standard wax lube. These 45 Long Colt “Cowboy Choice” Hi-Tek Coated Lead 250 grain RNFP rounds feed reliably in Lever Guns as well.Our bullets are “Hard-Cast.” Hard cast bullets are just that: harder. We use a 92% Lead/6% Antimony/2% Tin bullet alloy for casting all bullets.Hi-Tek Supercoat bullets are safe to shoot indoors. The coating gives off no toxic out-gassing or particulate matter when fired. The coating is absolutely nonabrasive and contains no PTFE or MOLY. There is no wax lube and it minimizes your exposure to lead. The end result is cleaner air, cleaner hands, cleaner equipment and cleaner guns!Check out a video of the Hi-Tek coating process here and see why you might want us to do it for you!!- Our bullets greatly reduce the amount of smoke normally associated with cast bullets
- Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
- Our coating gives off no toxins or particulate matter when fired
- Is 100% non abrasive and contains no PTFE or MOLY
- They are completely safe to use in Glock’s polygonal rifled barrels
- There is no risk of receiving bullets, only to find that the lube has melted or shaken out of the lube groove
- Greatly minimizes your exposure to lead
Meets SASS Power Factor.
Federal Primers !!
Sized: .452
Velocity: 450 FPS
Power Factor: 112
BHN 12/15
Approved for use in Indoor Ranges !!
Showing 1–12 of 17 results